Jandy AquaLink, AquaPure 3-Port 14-Blade Replacement Salt Cell Kit, 40K Gallons, and 16' Cable
Jandy PLC1400
Jandy Pro Series AquaPure Cell Kit, 14 Blade, 3-Port With 2" -2.5" PVC Universal Unions, Slotted Sensor, 16' DC Cable. PureLink Cell Chlorine Generator Kit, includes - Chlorinator Cell, 16' Cables, 2" Unions, Sensor Tee, & Sensor 1400 CELL KIT 3 PORT, W/ SENSOR, ORINGS & 16' CORD...... THIS REPLACES ALL THE 2 PORT CELLS AND 16' CORD IS THE ONLY LENGTH. HAS 2" SLIP - 2 1/2" SPG UNIVERSAL UNIONS.
Replacement cell comes with 2 unions, pressure switch, flow sensor, O-rings, and cell cord.
The AquaPure® system utilizes water softening technology to provide wonderfully smooth, and gentle-on-the-skin water for swimming.
Chlorine is generated automatically and naturally in your pool. Once the chlorine's purification work is done, it automatically converts back to salt, to be used over and over again.
The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.
Product Overview
Jandy AquaPure PureLink 3-Port Salt Cell Kit
3-Port cell has 90° plumbing flexibility, durable housing, sensor integrated into third port and larger unions for easy installation
Solid titanium plates manufactured with multiple coatings of precious metals to provide efficient chlorine production and enhanced cell life
Automatic reversing cycle helps keep the cell free from calcium buildup
Utilizing ordinary salt, the electrolytic AquaPure cell generates free chlorine for your pool. As the salt in the water passes through the AquaPure cell, it converts to free chlorine and continuously kills bacteria and algae while maintaining the desired sanitization you need to keep your water pure and clean. When the chlorine is finished purifying the pool water, it converts back into salt and the whole cycle repeats.
The AquaPure system utilizes water softening technology to provide wonderfully smooth, and gentle-on-the-skin water for swimming. Say goodbye to red, irritated eyes, itchy skin, green hair and even faded swimsuits.
Specs & Details
| Product Name | AquaLink, AquaPure 3-Port 14-Blade Replacement Salt Cell Kit, 40K Gallons, and 16' Cable |
| Manufacturer Part Number | PLC1400 |
| Sku | JDY-45-1405 |
| UPC | 052337011310 |
Very competitive price. Online purchase, confirmation and communication for shipping was great.
I installed this as a full replacement for a non working cell. I followed the install instructions to the letter. This cell does not function at all. I have tested the DC power in, and the flow sensor as well. It shows an error code of 145 (too much salt) the salt reading was 4.1. I replaced 25% of the water, and the reading remains 4.1, and the cell does not produce chlorine.
After looking at a lot of companies I found PoolZoom had the best price. It arrived in a timely manner and was the right part for what I needed.
Clear and simple instructions. All parts that were needed was included.
This cell kit includes additional product upgrade pieces that require a retrofit to the control panel which adds to the installation time. Hopefully not a big challenge--
Everything was good however the sensor was different than shown in picture. Not sure it was correct had to use old sensor.
I would recommend Poolzoom to everyone.
Very easy drop=-in replacement for my existing unit.
California Proposition 65 Warning
WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. For more information: www.p65Warnings.ca.gov
