Balancers

<p>Instant Pool Water Conditioner/Stabilizer is used for stabilizing chlorine from UV sunlight loss. It begins working to protect chlorine the instant it is added to the pool. Regular cyanuric acid with a pH of 2.8 is very acidic and it takes from 4 to 7 days to dissolve. This can cause damage to the pool surface or circulation system, depending on the method of application. Instant Pool Water Stabilizer is not an acid (it's a salt) and has a pool friendly pH, so it will not damage pool surfaces or equipment.</p>

<p><strong>Proteam pH Down - 10lb bucket, Sold in lots of 4 only </strong></p><p></p><p></p><p>Decreases pH and alkalinity in pool water. Proper pH levels prevents scale formation in pools and on equipment.</p><h2>Features</h2><ul><li><p>Lowers pH and total alkalinity</p></li><li><p>Fast dissolving granules</p></li></ul><h2>Benefits</h2><ul><li><p>Easier and safer to use than muriatic acid</p></li><li><p>Easy to use chart on packaging Improves effectiveness of sanitizer</p></li></ul><h2>Applications</h2><ul><li><p>Apply ProTeam pH Down when pH is about 7.6</p></li><li><p>Proper pH should range between 7.4 - 7.6</p></li></ul><h3><strong>Sold in case of 4 only</strong></h3><p><strong>40lbs per case</strong></p><p><strong>Sold in case of 4 due to shipping restrictions</strong></p>

ProTeam pH Down lowers pH and alkalinity in pool water. This product prevents scaling and is safer to use than liquid acid. Sanitizers work most efficiently when pH is kept in proper range. Therefore a properly balanced pool will require less sanitizer and less maintenance. Keeping your pool balanced is an important step in getting the most out of and preserving the life of pool and spa equipment. Best of all, pH Down is made right here in the USA to ensure the best possible quality, allowing you to buy with confidence.

<p>Introducing the 1 lbs Bottle of Pool and Spa pH UP, high quality Sodium Carbonate for raising pH. This is a balancing solution for maintaining the perfect pH balance in your swimming pool or spa. This high-quality pH up is designed to help raise the pH level in your pool, ensuring a safe and comfortable swimming experience for you and your loved ones.</p><p></p><p><strong>Dosage</strong>: 1 lb (16 oz) Moves pH from 6.6 to 7.2 in 10,000 Gallons of Water.</p>

<p>No Mor Muriatic Acid&reg; is the only alternative to liquid pool acid. No Mor Muriatic Acid&reg; is a revolutionary new water balancer that offers all the benefits of liquid acid but none of the draw backs. One 2.5 lb bottle is equivalent to one gallon. <b>Use:</b> Water balancer; lower pH and Alkalinity <b>Compatible with:</b> All types of swimming pools <b>Chemical Type:</b> Granular <b>Available Packaging:</b> 2.5 lb. bottle <b>Dosage Rate:</b> One 2.5 lb. is equivalent to one gallon of liquid acid</p>

<p>Pool Season 47251430 25 lb Ph Up Box</p><p></p><p>100% Sodium Carbonate</p><p>This granular product increases the water's pH effectively and conveniently. Reach optimum pH ranges with minimal effect on the overall alkalinity.</p><ul><li><p>Raises pH of Water</p></li><li><p>Contributes to Optimal Sanitizer Performance</p></li><li><p>Protects Pool Surfaces From Staining and Corrosion</p></li><li><p>Reduces Eye and Nose Irritation</p></li></ul><p>Available in various sizes. </p>

<p>Pool Season 47251460 Calcium Increaser 8 Lb. Pouch</p><p></p><p>100% Calcium Chloride</p><p>A convenient granular product for raising calcium hardness. Addition of this product as required will help protect pool from corrosion &amp; help prevent staining.</p><ul><li><p>Raise calcium hardness in water to recommended level</p></li><li><p>Help protect pool surfaces, plumbing, and equipment from corrosive conditions</p></li></ul><p>Available in various sizes.</p>

<p><strong>E-Z POOL®</strong> contains stable oxidizer, algaecide, clarifier, scale inhibitor, water conditioner and balancers (pH, Total Alkalinity, and Calcium Hardness) to keep swimming pool water clean, clear and trouble free. It provides a PROACTIVE water care program that PREVENTS problems instead of treating them on a REACTIVE basis after they occur. E-Z POOL® is compatible with chlorine, salt, bromine, UV and ozone, as well as traditional balancers and maintenance chemicals.</p>

<p>Pool Season 47251440 2.5 lb Ph Down Bottle</p><p></p><p>93.2% Sodium Bisulfate</p><p>This dry acid decreases the pH of pool water slowly and effectively. The granular product is more convenient than a liquid acid. Product of choice for lowering pH.</p><ul><li><p>Lowers pH of Water</p></li><li><p>Contributes to Optimal Sanitizer Performance</p></li><li><p>Helps Prevent Scale Build Up</p></li></ul><p>Available in various sizes. </p>

<p>Pool Season PSC5-SN Alkalinity Up 5 Lb. Pouch </p><h2></h2><p>100% Sodium Hydrogen Carbonate</p><p>Easy-to-use, this granular product raises total alkalinity in the pool and acts as a buffer to prevent pH bounce, staining, and corrosion.</p><ul><li><p>Raises Total Alkalinity in Water</p></li><li><p>Contributes to Optimal Sanitizer Performance</p></li><li><p>Protects Pool Surfaces from Staining and Corrosion</p></li><li><p>Helps Prevent pH Fluctuation</p></li></ul><p>Available in various sizes.</p>

E-Z POOL® is a patented water care program that combines simplicity with incredible water quality in a once-a-week application. This specially blended, multi-tasking formula manages swimming pool water while eliminating the confusion of adding multiple chemicals every other day. E-Z POOL® contains stable oxidizer, algae shield, clarifier, scale inhibitor, water conditioner and balancers (pH, Total Alkalinity, and Calcium Hardness) to keep swimming pool water clean, clear and trouble free. It provides a PROACTIVE water care program that PREVENTS problems instead of treating them on a REACTIVE basis after they occur. E-Z POOL® is compatible with chlorine, salt, bromine, UV and ozone as well as traditional balancers and maintenance chemicals.

<p>Pool Season 12000154 1-3/4 lb Conditioner. 100% cyanuric acid - chlorine stabilizer.<br></p><p>It prolongs the effective life of chlorine by reducing loss caused by the sun. The ideal level of POOL SEASON® Pool Stabilizer (also called Conditioner or Cyanuric Acid) is 40 ppm.</p><ul><li><p>Raises Stabilizer in Water</p></li><li><p>Reduces Chlorine Loss Caused by the Ultra Violet Rays of the Sun</p></li><li><p>Dissolves Completely When Applied As Directed </p></li></ul>

<p>Pool Season 247-7102 pH Up; 2 Lb.; 12/Case</p><h2></h2><p>100% Sodium Carbonate </p><p>This granular product increases the water's pH effectively and conveniently. Reach optimum pH ranges with minimal effect on the overall alkalinity.</p><ul><li><p>Raises pH of Water</p></li><li><p>Contributes to Optimal Sanitizer Performance</p></li><li><p>Protects Pool Surfaces From Staining and Corrosion</p></li><li><p>Reduces Eye and Nose Irritation</p></li></ul><p>Available in various sizes.</p>

<div class="descriptionunder reading-container"> <div class="product-description"> <h2>Description</h2> <p>The Poolife Pods Stabilizer and Conditioner is designed to make adding products easier. Simply drop in to add the pre-measured pouches into your pool, and the pool pump circulation will do the rest.</p> </div> <hr class="bs-docs-separator" /> <div class="product-bullet-points"> <ul> <li>Pre-Measured pouches for the perfect amount of product</li> <li>Quick and easy application</li> <li>Pods are completely water soluble</li> </ul> </div> <hr class="bs-docs-separator" /> <div class="product-dosage"> <h2>Dosage</h2> <p>Below is a list of pod additions for each pool size to raise stabilizer (cyanic acid) levels 10 ppm:</p> <ul> <li>5,000 gal pool - 1 pod</li> <li>10,000 gal pool - 2 pods</li> <li>15,000 gal pool - 3 pods</li> <li>20,000 gal pool - 4 pods</li> <li>25,000 gal pool - 5 pods</li> </ul> </div> <hr class="bs-docs-separator" /> <div class="product-directions"> <h2>Directions</h2> <p>This product aids to protect chlorine in pool water. It diminishes the loss of chlorine caused by sunlight. Use the product if sunlight makes it stubborn to maintain the correct chlorine level.</p> <ol> <li>Clean and backwash the filter.</li> <li>Adjust the free available chlorine (FAC) level to 1-4 parts per million (ppm).</li> <li>Measure the stabilizer (cyanuric acid) concentration. The ideal range is 20 - 40 ppm. The chlorine is not as effective if the range is above 90 ppm.</li> <li>Be sure the skimmer is clean and free of all chemical residue or debris.</li> <li>Add 1 pod directly into the pool skimmer while the pump is running. Allow the pod to dissolve before adding additional pods or other products. Only add one pod at a time.</li> <li>Leave the circulation pump running and <strong>DO NOT</strong> backwash for 4 hours.</li> <li>Use the list above to determine the correct amount of this product to use.</li> </ol></div> <hr class="bs-docs-separator" /> <div class="product-ingredients"> <h2>Ingredients</h2> <p><strong>Cyanuric Acid:</strong> 98.5%</p> <p><strong>Constituents Ineffective As Adjuvants:</strong> 1.5%</p> </div> </div> <div> <div class="yotpo yotpo-main-widget" data-product-id="1643865964614" data-name="Poolife Pods Stabilizer and Conditioner" data-url="https://www.poolgeek.com/products/poolife-pods-stabilizer-and-conditioner" data-image-url="//cdn.shopify.com/s/files/1/0099/3802/products/PoolifePodsSTAB_large.jpg%3Fv=1539189113" data-description="&lt;div class=&quot;product-description&quot;&gt; &lt;h2&gt;Description&lt;/h2&gt; &lt;p&gt;The Poolife Pods Stabilizer and Conditioner is designed to make adding products easier. Simply drop in to add the pre-measured pouches into your pool, and the pool pump circulation will do the rest.&lt;/p&gt; &lt;/div&gt; &lt;!-- product-description --&gt; &lt;hr class=&quot;bs-docs-separator&quot;&gt; &lt;div class=&quot;product-bullet-points&quot;&gt; &lt;ul&gt; &lt;li&gt;Pre-Measured pouches for the perfect amount of product&lt;/li&gt; &lt;li&gt;Quick and easy application&lt;/li&gt; &lt;li&gt;Pods are completely water soluble&lt;/li&gt; &lt;/ul&gt; &lt;/div&gt; &lt;!--product-bullet-points --&gt; &lt;hr class=&quot;bs-docs-separator&quot;&gt; &lt;div class=&quot;product-dosage&quot;&gt; &lt;h2&gt;Dosage&lt;/h2&gt; &lt;p&gt;Below is a list of pod additions for each pool size to raise stabilizer (cyanic acid) levels 10 ppm:&lt;/p&gt; &lt;ul&gt; &lt;li&gt;5,000 gal pool - 1 pod&lt;/li&gt; &lt;li&gt;10,000 gal pool - 2 pods&lt;/li&gt; &lt;li&gt;15,000 gal pool - 3 pods&lt;/li&gt; &lt;li&gt;20,000 gal pool - 4 pods&lt;/li&gt; &lt;li&gt;25,000 gal pool - 5 pods&lt;/li&gt; &lt;/ul&gt; &lt;/div&gt; &lt;!-- product-dosage --&gt; &lt;hr class=&quot;bs-docs-separator&quot;&gt; &lt;div class=&quot;product-directions&quot;&gt; &lt;h2&gt;Directions&lt;/h2&gt; &lt;p&gt;This product helps to protect chlorine in pool water. It stops the loss of chlorine caused by sunlight. Use the product if sunlight makes it difficult to maintain the correct chlorine level.&lt;/p&gt; &lt;ol&gt; &lt;li&gt;Clean and backwash the filter.&lt;/li&gt; &lt;li&gt;Adjust the free available chlorine (FAC) level to 1-4 parts per million (ppm).&lt;/li&gt; &lt;li&gt;Measure the stabilizer (cyanuric acid) concentration. The ideal range is 20 - 40 ppm. The chlorine is not as effective if the range is above 90 ppm.&lt;/li&gt; &lt;li&gt;Be sure the skimmer is clean and free of all chemical residue or debris.&lt;/li&gt; &lt;li&gt;Add 1 pod directly into the pool skimmer while the pump is running. Allow the pod to dissolve before adding additional pods or other products. Only add one pod at a time.&lt;/li&gt; &lt;li&gt;Leave the circulation pump running and &lt;strong&gt;DO NOT&lt;/strong&gt; backwash for 4 hours.&lt;/li&gt; &lt;li&gt;Use the list above to determine the correct amount of this product to use.&lt;/li&gt; &lt;/ol&gt; &lt;/div&gt; &lt;!--product-directions --&gt; &lt;hr class=&quot;bs-docs-separator&quot;&gt; &lt;div class=&quot;product-ingredients&quot;&gt; &lt;h2&gt;Ingredients&lt;/h2&gt; &lt;p&gt;&lt;strong&gt;Cyanuric Acid:&lt;/strong&gt; 98.5%&lt;/p&gt; &lt;p&gt;&lt;strong&gt;Constituents Ineffective As Adjuvants:&lt;/strong&gt; 1.5%&lt;/p&gt; &lt;/div&gt; &lt;!--product-ingredients --&gt; &lt;hr class=&quot;bs-docs-separator&quot;&gt;" data-yotpo-element-id="1"> <div class="main-widget yotpo-display-wrapper yotpo-no-reviews"> <div class="yotpo-label yotpo-small-box "></div> </div> </div> </div>

<div class="product-description"> <h2>Description</h2> <p>The Poolife pH Plus Pods are designed to make adding products easier. Simply drop in to add the pre-measured pouches into your pool, and the pool pump circulation will finish the rest.</p> </div> <hr class="bs-docs-separator" /> <div class="product-bullet-points"> <ul> <li>Pre-Measured pouches for the perfect amount of product</li> <li>Quick and easy application</li> <li>Pods are completely water soluble</li> </ul> </div> <hr class="bs-docs-separator" /> <div class="product-dosage"> <h2>Dosage</h2> <p>Below is a list of the pouch addition quantities:</p> <h3>If the pH is below 7.0:</h3> <ul> <li>10,000 gal - 1 Pod</li> <li>20,000 gal - 2 Pods</li> <li>30,000 gal - 3 Pods</li> </ul> <h3>If the pH is below 6.6:</h3> <ul> <li>10,000 gal - 5 Pods</li> <li>20,000 gal - 8 Pods</li> <li>30,000 gal - 10 Pods</li> </ul> <h3>If the pH is below 6.4:</h3> <ul> <li>10,000 gal - 8 Pods</li> <li>20,000 gal - 12 Pods</li> <li>30,000 gal - 16 Pods</li> </ul> </div> <hr class="bs-docs-separator" /> <div class="product-directions"> <h2>Directions</h2> <p>To keep your pool suitable for bathers and to protect pool surfaces and equipment from damage, the pH of pool water should be maintained between 7.2 and 7.8. To help reduce pH drift and variable changes when adjusting pH by testing the Total Alkalinity each week maintaining it between 60 and 120 ppm.</p> <ol> <li>Test for pH each time sanitizer is added using a reliable test kit.</li> <li>Be sure the skimmer is empty and does not contain any chemical residue or debris.</li> <li><strong><i>(Skimmer Application)</i></strong> - Add 1 pod directly into the pool skimmer while the pump is running. Allow the pod to dissolve before before adding additional additional pods or other pool products. Only add 1 pod at a time.</li> <li><strong><i>(Pool Application)</i></strong> - Add appropriate number of pods to the deep end of the pool with the circulation system on. Disperse any undissolved chemical from the bottom of the pool with a pool brush until the chemical is dissolved completely.</li> <li>Add an appropriate number of pods as designated in the list above to raise and maintain the pH between 7.2 and 7.8.</li> </ol></div>

<p>Pool Season 47251350 Conditioner; 5 Lb. Pouch</p><p></p><p>100% Cyanuric Acid </p><p>100% cyanuric acid - chlorine stabilizer. It prolongs the effective life of chlorine by reducing loss caused by the sun. The ideal level of POOL SEASON® Pool Stabilizer (also called Conditioner or Cyanuric Acid) is 40 ppm.</p><ul><li><p>Raises Stabilizer in Water</p></li><li><p>Reduces Chlorine Loss Caused by the Ultra Violet Rays of the Sun</p></li><li><p>Dissolves Completely When Applied As Directed</p></li></ul><p>Available in various sizes.</p>

<p>Pool Season 47251390 10 lb Alkalinity Up Pouch</p><p></p><h2></h2><p>100% Sodium Hydrogen Carbonate </p><p>Easy-to-use, this granular product raises total alkalinity in the pool and acts as a buffer to prevent pH bounce, staining, and corrosion.</p><ul><li><p>Raises Total Alkalinity in Water</p></li><li><p>Contributes to Optimal Sanitizer Performance</p></li><li><p>Protects Pool Surfaces from Staining and Corrosion</p></li><li><p>Helps Prevent pH Fluctuation</p></li></ul><p>Available in various sizes.</p>

<div class="product-dosage"> <h2>Dosage</h2> <h3>If Total Alkalinity: 50 ppm Range:</h3> <ul> <li>pH 7.0 add 8 oz per 10,000 gallons of water.</li> <li>pH 6.6 add 48 oz per 10,000 gallons of water.</li> <li>pH 6.4 add 80 oz per 10,000 gallons of water.</li> </ul> <h3>If Total Alkalinity: 100 ppm Range:</h3> <ul> <li>pH 7.0 add 12 oz per 10,000 gallons of water.</li> <li>pH 6.6 add 92 oz per 10,000 gallons of water.</li> <li>ph 6.4 add 144 oz per 10,000 gallons.</li> </ul> </div> <hr class="bs-docs-separator" /> <div class="product-directions"> <h2>Directions</h2> <h3>Before Adding this Product:</h3> <ol> <li>Meausre the pH of pool water with a Poolife 6-way Test Strip.</li> <li>The pH should be measured each time a sanitizer is added.</li> <li>Use the dosage reommendations to determine the correct amount of this produt.</li> </ol> <h3>How to add this product to your pool:</h3> <ol> <li>Scatter this product over the pool surface.</li> <li>Keep the circulationg pump running.</li> <li>Check the pH again after 2 hours.</li> <li>Repeat treatment if necessary.</li> </ol></div>

<h2>Product Information</h2> <p>Poolife pH Plus is used to raise pH levels in pool water. It helps prevent corrosion of metal fixtures and hard surfaces in your pool. Poolife pH Plus is composed of white, odorless granular sodium bicarbonate, also known as “soda ash.”</p> <h3 class="features">Product Benefits:</h3> <ul> <li>To raise pH levels</li> <li>Broadcast widely over the deep end of the pool with water circulating</li> <li>pH Plus can also be pre-dissolved and added as a liquid</li> <li>If so, it is recommended you add the liquid as you walk around the sides of the pool’s deep end</li> </ul> <h3 class="features">Dosage/Frequency:</h3> <ul> <li>Use as needed to raise pH level</li> <li>For dosage requirements, measure current pH then refer to product label for proper dosage</li> <li>The ideal pH range for your pool is 7.2 to 7.8, so use if pH level is lower than 7.2</li> </ul>

<h2><span style="font-size: 1.5em;">Product Information</span></h2> <div class="tab-pane-content"> <p>Sunlight exposure can deplete your pool of its proper chlorine supply. Poolife Stabilizer and Conditioner is a slow dissolving granular product that protects your pool from sunlight. This will extend the time chlorine remains in your pool and provide added protection against bacteria &amp; algae.</p> <h3 class="features">Product Benefits:</h3> <ul> <li>Should be added slowly through the skimmer</li> <li>As water circulated through the skimmer, the water’s turbulence helps dissolve the chemical</li> <li>Any remnants of product that do not fully dissolve will dissolve on the filter components</li> <li>Premature backwashing may wash away any un-dissolved Cyanuric Acid - the active ingredient in Poolife Stabilizer and Conditioner</li> <li>After applying product, wait at least 48 hours before backwashing</li> <li>It is recommended to backwash the filter prior to adding this product</li> <li>Be careful not to add product too quickly as this may clog the filtration system</li> </ul> <h3 class="features">Dosage/Frequency:</h3> <ul> <li>This product is very insoluble (slow dissolving)</li> <li>As such, it may take weeks to dissolve completely</li> <li>For ideal conditions, maintain a stabilizer level of 20 - 50 ppm</li> <li>Use 16 oz. per 10,000 gallons</li> </ul> </div>

<div class="product-description"> <h2><strong><span style="font-size: 12px;">Poolife pH Minus lowers the ph level in your swimming pool. pH levels should be maintained in the range of 7.2-7.6 ppm.</span></strong></h2> </div> <hr class="bs-docs-separator" /> <div class="product-dosage"> <h2>Dosage</h2> <h3>Lower ph:</h3> <p>If ph is 7.6-7.9 add 8 oz per 10,000 gallons of water..</p> <p>If pH is 8.0-8.4 add 16 oz per 10,000 gallons of water.</p> <p>If pH is above 8.4 add 24 oz per 10,000 gallons of water.</p> <h3>Lower Alkalinity:</h3> <p>2 lb per 10,000 gallons of water to lower alkalinity by 10 ppm.</p> </div> <hr class="bs-docs-separator" /> <div class="product-directions"> <h2>Directions</h2> <h3>To lower pH</h3> <ol> <li>Measure the pH of pool water with Poolife 6-Way Test Kit.</li> <li>Follow product dosage directions to determine correct amount of this product.</li> </ol> <h3>Usage:</h3> <p>Broadcast this product over the deepest part of the pool. In shallow pool (4 ft or less) dissolve product in a pail of water before adding to pool. Always add product into water.</p> <h3>How to Lower Alkalinity:</h3> <p>Keep the total alkalinity betwen 60-120 ppm. Each month, test for total alkalinity with Poolife 6-Way Test Kit. If alkalinity is high:</p> <ol> <li>Add 2 lb of this product for each 10,000 gallons of pool water to lower alkalinity 10 ppm.</li> <li>Keep the ciculation pump running.</li> <li>Add this product in one spot at the deep end of the pool.</li> <li>Do Not apply near walls and metal fixtures.</li> <li>Repeat each day until desired alkalinity is reached.</li> </ol></div> <hr class="bs-docs-separator" /> <div class="product-ingredients"> <h2>Ingredients</h2> Sodium Bisulfate: 92%, <strong>Constituents Ineffective as adjuvants: </strong>8%</div>

<h2>Product Information</h2> <p>Poolife pH Minus is a white, granular form of sodium bisulfate (dry acid). Poolife pH Minus is equally effective at lowering your pool’s pH levels and lowering Total Alkalinity (TA). But it depends on how the product is applied.</p> <ul> <li>Use Poolife pH Minus to lower pH</li> <li>While water is circulating, broadcast widely over the deep end of the pool.</li> <li>If you would like to pre-dissolve and add pH Minus as a liquid, add the liquid as you walk around the sides of the pool.</li> </ul> <h3 class="features">Dosage/Frequency</h3> <h3 class="features">To Lower pH:</h3> <ul> <li>Try to keep your pH levels between 7.2 – 7.8</li> <li>Use this product if pH goes above 7.8</li> <li>Proper dosages will vary</li> <li>The proper dosage is determined by your current pH</li> <li>First, test current pH. Then refer to product label for proper dosage to adjust pH</li> </ul> <h3 class="features">To Lower Total Alkalinity:</h3> <ul> <li>Add the product in one localized area at the deepest end of the pool: this will create a localized pocket of low pH, which will lower your total alkalinity</li> <li>Total alkalinity (TA) should be in the range of 80 – 120 ppm</li> <li>Adding 2 lbs. per 10,000 will lower TA by 10 ppm</li> <li>Do not exceed 2 lbs. per 10,000 gallons per day: if additional adjustment is needed, add the following day</li> </ul> <p><i>*</i>Important* Remember, do not broadcast. The key is to add the acid in one isolated area</p>

<p><span style="font-size: medium;">Poolife® Alkalinity Plus Balancer</span></p> <div class="description"> <p><span style="font-size: medium;">Poolife® Alkalinity Plus balancer raises the total alkalinity of swimming pool water. The ideal total alkalinity range is 60-120 ppm. Maintaining total alkalinity below 60 ppm may cause the pH to fluctuate excessively.</span></p> <h3><span class="heading4" style="font-size: medium;">Useful Tips</span></h3> <ul> <li><span style="font-size: medium;">Test total alkalinity weekly and add this product if total alkalinity is below 60 ppm.</span></li> <li><span style="font-size: medium;">Use convenient dosage chart on product label.</span></li> <li><span style="font-size: medium;">Always adjust total alkalinity prior to adjusting pH.</span></li> </ul> <div><span style="font-size: medium;"></span></div> <div><span style="font-size: medium;"></span></div> <div><span style="font-size: medium;"><br /></span></div> <div><span style="font-size: medium;"><span style="font-size: medium;"></span></span> <h2>Dosage</h2> </div> <div><span style="font-size: medium;"><span>1.5 lb per 10,000 gallons to raise total alkalinity 10 ppm.</span></span></div> <div><span style="font-size: medium;"><br /></span></div> <div><span style="font-size: medium;"><span style="font-size: medium;"></span></span> <h2>Ingredients</h2> </div> <div><span style="font-size: medium;"><strong>Sodium Bicarbonate: </strong><span>100%</span></span></div> <div><span style="font-size: medium;"></span></div> <div><span style="font-size: medium;"><br /></span></div> </div>

<p>Pool Season 47251470</p><p>25 lb Calcium Increaser Box </p><p></p><p>100% Calcium Chloride. A convenient granular product for raising calcium hardness. Addition of this product as required will help protect pool from corrosion &amp; help prevent staining.</p><ul><li><p>Raise calcium hardness in water to recommended level</p></li><li><p>Help protect pool surfaces, plumbing, and equipment from corrosive conditions</p></li></ul>

<p>Pool Season 47251400 25 lb Alkalinity Up Box</p><p></p><h2></h2><p>100% Sodium Hydrogen Carbonate </p><p>Easy-to-use, this granular product raises total alkalinity in the pool and acts as a buffer to prevent pH bounce, staining, and corrosion.</p><ul><li><p>Raises Total Alkalinity in Water</p></li><li><p>Contributes to Optimal Sanitizer Performance</p></li><li><p>Protects Pool Surfaces from Staining and Corrosion</p></li><li><p>Helps Prevent pH Fluctuation</p></li></ul><p>Available in various sizes.</p>

<p>Pool Season 47251450 5 lb pH Down Pouch</p><p></p><p>93.2% Sodium Bisulfate </p><p>This dry acid decreases the pH of pool water slowly and effectively. The granular product is more convenient than a liquid acid. Product of choice for lowering pH.</p><ul><li><p>Lowers pH of Water</p></li><li><p>Contributes to Optimal Sanitizer Performance</p></li><li><p>Helps Prevent Scale Build Up</p></li></ul><p>Available in various sizes.</p>

<p>Pool Season 47251350 Conditioner; 8 Lb. Pouch</p><p></p><p>100% Cyanuric Acid </p><p>100% cyanuric acid - chlorine stabilizer. It prolongs the effective life of chlorine by reducing loss caused by the sun. The ideal level of POOL SEASON® Pool Stabilizer (also called Conditioner or Cyanuric Acid) is 40 ppm.</p><ul><li><p>Raises Stabilizer in Water</p></li><li><p>Reduces Chlorine Loss Caused by the Ultra Violet Rays of the Sun</p></li><li><p>Dissolves Completely When Applied As Directed</p></li></ul><p>Available in various sizes.</p>

<p>Pool Season 47251420 pH Up; 5 Lb. Pouch</p><p></p><h2></h2><p>100% Sodium Carbonate</p><p>This granular product increases the water's pH effectively and conveniently. Reach optimum pH ranges with minimal effect on the overall alkalinity.</p><ul><li><p>Raises pH of Water</p></li><li><p>Contributes to Optimal Sanitizer Performance</p></li><li><p>Protects Pool Surfaces From Staining and Corrosion</p></li><li><p>Reduces Eye and Nose Irritation</p></li></ul><p>Available in various sizes. </p>

<p>E-Z Clor 12000546 5 lb pH Up pool balancer. This granular product increases the waters pH effectively and conveniently. Reach optimum pH ranges with minimal effect on the overall alkalinity.</p>

<p>Pool Season 12000160 5 lb pH Up.</p><p>This granular product increases the waters pH effectively and conveniently. Reach optimum pH ranges with minimal effect on the overall alkalinity.</p><ul><li><p>Raises pH of Water</p></li><li><p>Contributes to Optimal Sanitizer Performance</p></li><li><p>Protects Pool Surfaces From Staining and Corrosion</p></li><li><p>Reduces Eye and Nose Irritation</p></li></ul>

<p>Pool Season 47251370 1 gal Liquid Conditioner Bottle </p><p></p><p></p>