Home
#84340

Product Out of Stock

Sorry, this product is temporarily out of stock.

BAQUACIL Liquid Flocculant

84340

$22.90
Notify me when available
Quick Overview

Product Dosage

8 fl oz per 10,000 gallons of water.

Directions

  1. Before using this product, adjust total alkalinity and pH to the normal ranges using a reliable test kit or test strips.
  2. Set filter on re-circulate. If filter does not have a re-circulate setting, (cartridge or D.E. filters), remove cartridge or D.E. grids from filter prior to use.
  3. Raise the water level in the pool to the top of the skimmer box.
  4. With the pump running, slowly pour 8 fl oz of Baquacil Liquid Flocculant for every 10,000 gallons of pool water.
  5. Add the product directly into the pool water around the edges of the pool.
  6. Turn off the pump and allow suspended material to settle to the bottom of the pool. Leave the pump off and do not use the pool until cloudiness has settled, usually in 12-24 hours. If pool has a timer remove the "on tripper".
  7. Vacuum settled material to waste not to vacuum though the filter.
  8. Turn the filter back to filter setting or replace cartridge/D.E. grids and turn on pump.
  9. Check water balance and adjust as necessary.

Baquacil Liquid Flocculant can be used with all sanitizer including Baquacil, chlorine, bromine and salt systems.

Questions? Contact our pool professionals:
Product Overview

BAQUACIL Liquid Flocculant (1 qt) is great at helping to remove dead algae and other suspended particles that contribute to cloudy water. This product easily settles these contaminates and makes it easy to vacuum.

Specs & Details

Product NameBAQUACIL Liquid Flocculant
Manufacturer Part Number84340
SkuLON-50-84340
Downloads

California Proposition 65 Warning

WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. For more information: www.p65Warnings.ca.gov