<p>Pentair seal kit for Whisperflo and Intellifo pumps. Includes shaft seal, seal plate gasket, Impeller screw washer, diffuser o-ring, strainer pot o-ring and drain plug o-ring.</p>

<p>Pentair 190003 Filter Tank Clamp Kit. Includes clamp, washer &amp; spring barrel nut assembly. Fits Pentair, American Products, PacFab Clean and Clear Plus Cartridge and FNS Plus DE &amp; Quad D.E. Filters. Measures approx. 23-1/4-inch length by 2-1/4-inch height by 22-1/4-inch width.</p><p>*Please note there has been a manufacturing change the clamp is now black.</p>

<p>The 355468Z Pentair Front Housing fits the Pentair (PacFab) Challenger High Flow and High Pressure swimming pool pumps. On one end this part goes over the diffuser and impeller and connects to the seal plate with a large band clamp. It connects to the strainer pot on the other end. The discharge port accepts a standard 2" Threaded Male PVC fitting.</p>

<p>WhisperFlo Pump Rebuild Kit, Seal Kit. Includes: </p><ul><li><p>(1) Lid O-Ring (Cam and Ramp Style) - 350013</p></li><li><p>(1) Molded Seal Plate Gasket (after 1994) - 357102</p></li><li><p>(1) Diffuser O-Ring, WFE Pump - 071444</p></li><li><p>(1) Mechanical Seal Set - PS 1000</p></li></ul><p></p>

Replacement Front Housing O-Ring for Pentair Challenger Pumps, Square

<p>Replacement Lid O-Ring for Pentair Challenger, Pentair Whisperflo (New Style), Pentair IntelliFlo and select Pentair EQ Pumps. Dimensions: INSIDE DIAMETER: 5-3/4" CORD THICKNESS: 1/4"</p>

<p><strong>Includes:</strong> Shaft Seal (1), Diffuser O-ring (1), Housing O-Ring (1), Strainer O-ring (1), Lid O-ring (1)</p>

Seal Assembly

Replacement Rainbow, Pentar Chlorinator Lid O-Ring. Heavy Duty Viton Rubber. Fits Chlorinator Models 320, 322, 300, 302 <strong>Dimensions:</strong> 3-3/4" ID Diameter 3/16" Cross Section (thickness)

<ul><li><p>Height 7 3/4"</p></li><li><p>Top Diameter 5 3/4"</p></li><li><p>Bottom Diameter 3 1/4"</p></li><li><p>WhisperFlo Pump Replacement Basket</p></li><li><p>Color may vary</p></li></ul><p>Replacement Pump Basket for Whisperflo Pool Pumps, 070387. Fits: Pentair Purex, Aquatron #P-01325 Whisperflo, IntelliFlo, Waterway Hi-Flow</p>

<p>This is a single, hinged weir assembly. Fits various Sta-Rite/Swimquip U-3 Skimmers. Attaches to the skimmer with a plastic hinge that is 8-1/4" inch long by 13/16" inch wide, five holes are in the hinge arranged in two rows.<br></p><h2>Dimensions</h2><p>Length: 8-1/2" <br>Width: 5-1/8"<br></p><h2>Markings</h2><p>Weir body is marked with PAT. 270235. Weir hinge Weir body is marked with 8650–4. Weir hinge is marked with 8650–8</p>

<p>Pentair 192323 Gasket O-Ring, Stand Pipe / Strainer Pot to Pump Body, Volute Hydropump. </p>

Pentair Replacement Impeller Set Screw, 1/4-20 x 1 Left Hand Thread Phillips Head for select Swimming Pool Pumps.

<p>18" Diameter Tank O-Ring</p>

<p>The Pentair R173217 200 Square Feet Cartridge Element Replacement is a high-performance replacement cartridge designed for pool and spa filters. It has a diameter of 10-1/16" and a length of 31-1/8", and is compatible with several filters, including American Products/Pentair Clean &amp; Clear 100, Predator 100, Pentair Clean &amp; Clear 200, Clean &amp; Clear CCRP200, and Predator 200 filters. This cartridge is made with high-quality materials, is easy to install, and is designed to provide maximum filtration performance while ensuring that your pool or spa remains clean and healthy.</p>

<p>Pentair 355330 Strainer Pot Flange O-Ring For Tagelus Sand Filters, Challenger High Flow and High Pressure Pump, WaterFall Pump and Admiral Skimmers</p><p></p><p>Replacement O-Ring Dimensions: 2-3/8" ID, 1/8" Cross Section</p>

Keep your pool or spa operating at the proper temperature with this water, air, solar sensor. As a WATER sensor install into the pipe between the filter pump and filter to keep the water temp where desired. As an AIR sensor install in the open air to notify your automation system of ambient air temperature. As a SOLAR sensor install next to the solar panels for unglazed panels, for glazed panels suspend sensor between the collector and the glazing. This replaces TS5T, STS5T Not replacement for Compool TS5L sensor

Replacement Flow/ Temperature switch for Pentair IntelliChlor salt chlorine generators. Comes with two water tight pair-at-a-time wire connectors.

<p>Pentair 357149 Volute Replacement Kit for use with: WFE Pump &amp; Pot, WhisperFlo High Performance Pump, IntelliFlo VS Pump, IntelliFlo VF Pump. Includes volute, backplate, mechanical shaft seal, lid, basket and o-rings.</p>

<p>Pentair 152290 Lateral 6-11/16" Long. 8 Required. <br></p><p><strong>Fits Triton II Sand Filter Models: </strong></p><p>TR40, TR50, TR60</p>