Waterway Impeller 1.5HP (Hi Flo)
Waterway 310-4010
This Is a 1-1/2 HP Impeller Used On The Waterway Hi Flo Pump, Gray Plastic Impeller 310-4010
Product Overview
This Has An Extended Inlet Opening And At The Shaft Side There Is Small Raised Ring Around The Shaft The Ring Is 5/16" Tall And Has An Outside Diameter Of 1-9/16" This Also Has A Small Ridge Around The Outside Diameter Of The Impeller On The Shaft Side.
Number Of Vanes 6
Outside Diameter: 3-5/8"
Thickness: 7/16" (Inside Vane Thickness At Outside Edge Of Impeller)
Thickness: 13/16" (Outside Vane Thickness At Outside Edge Of Impeller)
Front To Back: 3-3/16" (From End Of Shaft To Front On Intake)
Inlet Inside Diameter: 1-1/2"
Inlet Outside Diameter: 1-7/8"
Inlet Length: 1"
This Is The Approximate Length Of The Extended Inlet Portion Of The Impeller
MARKINGS: "SIDE DISH COVER 313-1530" is molded on the inlet side. "ASSY 310-4010-D - 1 1/2 HP" is also molded on the inlet side
Specs & Details
| Product Name | Impeller 1.5HP (Hi Flo) |
| Manufacturer Part Number | 310-4010 |
| Sku | WWP-85-8034 |
| UPC | 806105063199 |
California Proposition 65 Warning
WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. For more information: www.p65Warnings.ca.gov
