Balboa

This Balboa dual sensor assembly for 700 series systems includes the Hi-Limit & Temperature Sensor. <b>Hi-Limit Dimensions</b> 1/4" Diameter Bulb 31" Cable <b>Temperature Sensor Dimensions</b> 3/8" Diameter Bulb 96" Cable. 4 Pin, White End Connector

This 24" M-7 Series Temperature / Hi-Limit assembly includes the o-ring and top nut. <b>Dimensions</b> 1/4" Diameter Bulb 24" Cable 2 Pin, Black End Connector

<p>Balboa Bath Pump 5.5 Amp 115V 1 Speed w/Air Switch &amp; Cord, 1050031 </p><p>Balboa / Pentair bath WOW pump includes air switch and 115V nema cord.</p><ul><li><p>Voltage: 115V</p></li><li><p>Amperage: 5.5</p></li><li><p>Horsepower: .50GPM: 65</p></li><li><p>Intake: 1-1/2"</p></li><li><p>Discharge: 1-1/2" Self draining volute.</p></li></ul><p>Length: 13-1/2"</p><p>Width: 4-7/8"</p><p>Height: 7-1/4"</p><p></p>

This replacement impeller is designed to fit Balboa / Vico Ultra Flow Self Draining bath pumps. May fit other model pumps as well. These original impellers were made with a green stripe on the shaft. The current impellers have no stripe on the shaft. This is a new, OEM Balboa part, number: 1212206. Previous part number: PPUF5IMP.

This replacement 3 horsepower impeller is designed to fit Balboa / Vico Ultra Flow Self Draining bath pumps. May fit other model pumps. This impeller is a new, OEM part, number: 1212225. Previous part number: PPUL3IMP.

This replacement 2 horsepower impeller is designed to fit Balboa / Vico Ultra Flow Self Draining bath pumps. May fit other model pumps. This impeller is a new, OEM part, number: 1212218. Previously part number: PPUL20IMP.

This replacement 3/4 horsepower impeller is designed to fit Balboa / Vico Ultra Flow Self Draining bath pumps. May fit other model pumps. This impeller is a new, OEM Balboa part, number: 1212207. Previous part number: PPUF7IMP.

This replacement 4 horsepower impeller is designed to fit Balboa / Vico Ultra Flow Self Draining bath pumps. May fit other model pumps. This impeller is a new, OEM part, number: 1212221. Previous part number: PPUL4IMP.

This replacement 1-1/2 horsepower impeller is designed to fit Balboa / Vico Ultra Flow Self Draining bath pumps. May fit other model pumps. This impeller is a new, OEM part, number: 1212215. Previously part number: PUF15IMP.

This replacement 1 horsepower impeller is designed to fit Balboa / Vico Ultra Flow Self Draining bath pumps. May fit other model pumps. This is a new, OEM replacement part, number: 1212205. Previous part number: PPUF1IMP.

<p>Balboa HydroQuip J/J/L/W/M/C Control Panel Overlay, 80-11774-K</p><p>The J/J/L/W/M/C Control Panel Overlay is a user-friendly interface designed for use with HydroQuip spa control systems. It features clearly labeled buttons for easy control of essential spa functions, including jets (J), lights (L), water (W), mode (M), and control settings (C). Built for durability, this overlay is engineered to withstand the humid and demanding conditions of spas, providing long-lasting performance. It works seamlessly with compatible HydroQuip control systems, offering spa owners a convenient and reliable way to manage heating, water circulation, filtration, and other key spa features.</p>

This replacement Shaft Seal is designed to fit Balboa / Vico Ultra Flow Self Draining bath pumps. May fit other model pumps. Part number: 1213003.

<p>Balboa Dura-Jet Pump, 48 Frame 2.0HP 2 Speed 115V, DJAYFA, 4239113-S</p><p>The Dura Jet Style by Balboa Water Group - pumps have earned a reputation for consistent quality and long service life. The wetend provides Multi-directional volute mountings and a 3 position drain plug for complete flexibility of configuration.</p>

<p>The Micro’ssage Grill and Flow Path Assembly White is a premium white grill and flow path assembly engineered for HydroAir Microssage spa jets. This replacement internal component converts a standard therapy jet into a rotating Microssage jet, delivering a massaging water action that enhances hydrotherapy performance. Constructed from durable plastic, it provides maintenance-free operation without the need for lubrication.</p>

This replacement Volute O-Ring is designed to fit Balboa / Vico Ultra Flow Self Draining bath pumps. May fit other models. OEM Part number: PPUFVOR. <b>Dimensions:</b> Inside Diameter: 5" Cross Section: 3/32"

This replacement seal plate is designed to fit Balboa and Vico Ultra Flow Self Draining bath pumps.

This replacement seal plate is designed to fit Balboa / Vico Ultra Flow Self Draining bath pump. Part number: 1211009, previously: PPULVBW.

<p>Balboa Cyclone Micro jet with adjustable internal swirl and directional flow, finished in dark gray with an emerald-cut face. Part number 9649WW.</p><p><strong>Features:</strong></p><ul><li><p>Scalloped textured finish</p></li><li><p>Dark gray color</p></li><li><p>Emerald-cut face design</p></li></ul><p><strong>Product Specifications:</strong></p><ul><li><p>Face diameter: 3-1/4″</p></li><li><p>Adjustable flow</p></li><li><p>Directional type</p></li></ul>

<p>Balboa Water Group Ultimax 5235208-S Ultimax Pump 2HP 230V 8.8 Amp 2 Speed 2" Suction Port</p><p>Premier Ultimax pumps are the ultimate benchmark in design flexibility and performance. From small applications for zone seating and focused therapy up to multi pump configurations to run 100+ jetted systems. Ultimax pumps supply the specific performance features you require and the long service life and powerful performance spa owners demand.</p>

<p>Balboa Large Cyclone Micro Jet Insert with an emerald-cut face, featuring adjustable internal swirl and directional flow. Finished in dark gray with a 3-1/4″ outer-diameter jet face. Part number 9648WW.</p><p><strong>Features:</strong></p><ul><li><p>Twist-lock installation</p></li><li><p>Scalloped textured surface</p></li><li><p>Gray color finish</p></li><li><p>Rotating jet style</p></li><li><p>Emerald-cut face design</p></li><li><p>Adjustable water flow</p></li></ul><p><strong>Product Specifications:</strong></p><ul><li><p>Face diameter: 3-1/4″</p></li><li><p>Nozzle diameter: 9/16″</p></li><li><p>Base diameter: 1-5/8″</p></li><li><p>Flow direction: Internal</p></li><li><p>Diffuser length: 2-15/16″</p></li><li><p>Diffuser opening: Type 2</p></li><li><p>Overall length: 3-9/16″</p></li></ul><p></p>

<p>Balboa Water Group CONVERTA'SSAGE Wall Fitting with Bearing White, 56-5215WHT</p><p>The Converta’ssage Wall Fitting with Bearing White is a quality replacement component for HydroAir Convertassage jet systems. Designed to restore smooth, rotational water movement, this part features an internal water-driven bearing that operates without lubrication. Its durable white plastic construction blends seamlessly with most spa interiors while providing reliable, long-term performance.</p>

<p>Balboa Cyclone Luxury jet with an adjustable swirl nozzle and emerald-cut face, featuring internal roto action in a dark gray finish. Part number 9846WW.</p><p><strong>Features:</strong></p><ul><li><p>Twist-lock installation</p></li><li><p>Internal jet design</p></li><li><p>Rotating (roto) flow action</p></li><li><p>Scalloped textured face</p></li><li><p>Dark gray color</p></li></ul><p><strong>Product Specifications:</strong></p><ul><li><p>Face diameter: 3-1/2″</p></li><li><p>Nozzle diameter: 3/4″</p></li><li><p>Base diameter: 2″</p></li><li><p>Diffuser opening type: 2</p></li><li><p>Diffuser length: 3-1/8″</p></li><li><p>Overall length: 3-15/16″</p></li></ul>

<p>Balboa 4 Button Vl404 Keypad without Overlay, G8244</p><p><strong>Key Features:</strong></p><ul><li><p>Genuine Balboa Water Group topside control panel designed for compatible spa systems.</p></li><li><p>4-button interface for essential spa functions such as temperature adjustment, jets, light, and other controls (specific functions depend on overlay used).</p></li><li><p>Operates without an overlay, allowing flexibility to add a compatible graphic overlay separately.</p></li><li><p>Rectangular keypad design suited for many Balboa VL404 control systems.</p></li><li><p>RJ45 (8-wire) connector with cord for easy connection to the spa’s control board.</p></li></ul><p></p>

<p>Balboa Therm Products C2400-C333-01 Flow Thru Heater 4Kw 240V Replacement MPN</p>

<p>HEATER O-RING 2"</p>

<p>Balboa G6422 BP100G2 Control System With 4.0kW Heater And TP260T Panel</p><p>The Balboa Water Group G6422 is a spa control system built for a wide range of spa applications. It comes equipped with a 4.0kW heater and a TP260T control panel. This model works well with many different spa configurations. Its compact design allows for straightforward integration and installation.</p><ul><li><p>Cost-efficient option for spa control</p></li><li><p>Compatible with all Balboa TP control panels</p></li><li><p>Engineered for simple installation with an integrated heater</p></li></ul>

<p>Balboa WaveZone UV/O3 Combo, 59329-01</p><p><strong>Key Features &amp; Benefits</strong></p><ul><li><p><strong>Dual Sanitization:</strong> Uses UV-C light and ozone (O3) in a reactor chamber for a multiplied sanitation effect, killing bacteria, viruses, and other contaminants.</p></li><li><p><strong> Advanced Oxidation Process (AOP):</strong> Creates highly reactive hydroxyl radicals to break down impurities, ensuring cleaner, clearer water.</p></li><li><p><strong>Durable Construction:</strong> Features a 316L stainless steel UV reactor, fully epoxy-potted ozone cells, and a powder-coated galvanized steel enclosure for harsh spa environments.</p></li><li><p><strong>Reduced Chemicals:</strong> Significantly lowers the need for traditional chemical sanitizers, minimizing skin and eye irritation.</p></li><li><p><strong>Compact &amp; Easy Install:</strong> Small footprint with mounting tabs and standard 3/4" connections for straightforward integration into spa filtration systems.</p></li><li><p><strong>LED Indicators:</strong> Shows UV lamp and ozone cell status for easy monitoring.</p></li><li><p><strong>High Performance:</strong> Often rated at 200mg/hr for swim spas and larger hot tubs, operating at 220V-240V.&nbsp;</p></li></ul>

<p>Balboa Overlay Panel for TP600 J1/J2/AUX, 12762</p>

<p>The Balboa 25257 Y-Cable is a 6-pin Molex splitter for Balboa BP series spa packs, designed to connect two auxiliary topside control panels (like AX10 or AX20) to one port on the spa's circuit board, allowing for dual control panels or a panel and a WiFi module. It features one male 6-pin Molex connector that plugs into the spa pack and two female 6-pin Molex receptacles for the auxiliary devices, simplifying wiring for spa electronics.</p><p><strong>Key Features:</strong></p><ul><li><p><strong>Part Number:</strong> 25257 (also replaces 389263).</p></li><li><p><strong>Type:</strong> Y-Splitter Cable.</p></li><li><p><strong>Connectors:</strong> 1 Male (M) to 2 Female (F) 6-Pin Molex.</p></li><li><p><strong>Application:</strong> Connects auxiliary panels (e.g., AX10A2, AX20) to Balboa BP, EL, or GL series spa packs.</p></li><li><p><strong>Purpose:</strong> Splits one port into two for additional control panels or accessories.&nbsp;</p></li></ul><p></p>

<p>Balboa Suction Cover, Light Gray 30240U-LG</p><p><strong>Key Details:</strong></p><ul><li><p><strong>VGB Compliant</strong></p></li><li><p><strong>Size:</strong> ~4-7/8″ diameter cover</p></li><li><p><strong>Flow Ratings:</strong> Designed to safely handle flows of 179 GPM and 256 GPM</p></li><li><p><strong>Use:</strong> Installed on suction lines</p></li></ul>

<p>Balboa Overlay for Vl200 Keypad, Jets, Temp, Light, 11127 </p>

<p>Balboa Spa Light Assembly without Lens, 21089</p>

<p>Balboa 1" <strong>White</strong> Air Slimline Control, 10-2310WHT</p><p><strong>Key Features:</strong></p><ul><li><p>Slimline, space-saving design in <strong>white</strong> that integrates cleanly with spa walls.</p></li><li><p>1″ plumbing connection for compatibility with standard spa air lines.</p></li><li><p>Adjustable air intake control, allowing you to regulate or shut off the air mixed into the spa jets.</p></li><li><p>Designed for quiet (“silent”) air flow during operation.</p></li><li><p>Includes gasket and nut for mounting through a ~1-3/4″ hole in the spa shell.</p></li><li><p>Durable construction suitable for the spa environment.</p></li></ul>

<p>Balboa Topside VL403 LED 4-Button Control, without Overlay, G8243</p><p><strong>Key Features:</strong></p><ul><li><p>Genuine Balboa Water Group part designed for spa/hot tub control panel applications.</p></li><li><p>4-button interface for operating essential spa functions such as pumps/jets, temperature, and lighting (specific functions depend on overlay used).</p></li><li><p>Electronic topside control with responsive buttons for user interaction.</p></li><li><p>RJ45 (8-wire) connector cable (typically ~6–7 ft) for simple plug-and-play connection to compatible Balboa control systems.</p></li><li><p>Rectangular panel design that fits standard spa cutouts and allows overlay installation separately (overlay not included).</p></li></ul>

<p>Balboa 4-Button Vl401 Topside Keypad, without Overlay, G8241</p><p><strong>Key Features:</strong></p><ul><li><p>OEM Balboa Water Group spa topside control designed for compatible VS/GS spa control systems.</p></li><li><p>4-button interface for core spa functions (e.g., jets, light, temperature, blower depending on overlay used).</p></li><li><p>Rectangular, compact design that fits standard VL401 cutouts.</p></li><li><p>7-foot cord with RJ45 (8-wire) connector for simple plug-and-play connection to the spa control board.</p></li><li><p>Overlay sold separately, giving flexibility to match button labels to your spa functions.</p></li><li><p>Replaces multiple part numbers in the VL401 series, making it a versatile replacement option.</p></li></ul>

<p>Balboa 4-Button VL200 Topside Keypad without Overlay, G8220</p><p><strong>Key Features:</strong></p><ul><li><p>Genuine Balboa Water Group OEM part — replacement control panel designed for Balboa spa systems. </p></li><li><p>4-button interface for essential spa functions (e.g., adjusting temperature, activating jets, controlling lights and blower). </p></li><li><p>Ships without an overlay, so you can reuse your existing graphic or install a custom overlay. </p></li><li><p>Mini-oval, compact design ideal for tight panel spaces and many spa cabinet openings. </p></li><li><p>Clear LCD display window for easy viewing of temperature and system status. </p></li><li><p>Pre-attached RJ45 (8-wire) cable (~6–7 ft) for simple plug-and-play connection to compatible Balboa VS/GS spa packs. </p></li><li><p>Widely compatible with Balboa VS/GS spa control systems, making it a versatile replacement option.</p></li></ul>

<p>Balboa G7411 FloThru Heater BP100 4.0Kw </p>

<p>Balboa 10Ft Extension Loom Assembly With 8-Pin Connector 30311</p><p>Balboa 30311 10 ft Extension Loom Assembly with 8-Pin Connector is a 10-foot electrical extension cable used in spa control systems to extend the connection between components such as topside control panels and the main electronics. It features an 8-conductor lead with an 8-pin (1-to-1) connector at each end, allowing you to lengthen wiring runs without modifying original harnesses. This extension loom is typically used with Balboa Water Group serial standard and serial deluxe spa control products to improve flexibility during installation or service. </p>

<p>Balboa Water Group 30-3803WHT White Extended Wall Fitting</p><p>This part is designed to meet the highest standards of performance. It is built to last, allowing for reliability and strength. Made for easy installation and use, it will help ensure the best service life possible.</p>

<p>Balboa Water Group Ultimax 5235212-S Ultimax Pump 4HP 230V 12.0 Amp 2 Speed 2" Suction Port </p><p>Premier Ultimax pumps are the ultimate benchmark in design flexibility and performance. From small applications for zone seating and focused therapy up to multi pump configurations to run 100+ jetted systems. Ultimax pumps supply the specific performance features you require and the long service life and powerful performance spa owners demand.</p><p></p>

<p>Balboa FloThru Heater LE 4.0kW 230V with PS Sensor</p>

<p>Balboa G7417 Remote FloThru Heater, VS100, 4.0kw</p>

<p>Balboa Caldera/Watkins 4kW 240V Low Flow Trombone Heater C3473-1</p><p>The 4kW Caldera Low Flow Trombone Heater is a high-performance replacement heater designed for Caldera and Watkins hot tubs with lower water circulation. Its trombone-style design allows for efficient water heating, even in spas that experience reduced flow, making it ideal for models like the Caldera Utopia and Paradise Series. The flow switch and hi-limit sensor enhance safety by ensuring the heater operates within optimal conditions. Additionally, it features a 4kW at 240V heating element and comes with 3/4" hose barb connections for a secure plumbing setup and a 40" pigtail cord for flexible installation.</p><p>Alternate Part Numbers:</p><ul><li><p>26-3473-1-5T-K (HydroQuip)</p></li><li><p>74912 (Watkins)</p></li><li><p>SEH-4300-NHW (Laing)</p></li></ul>

<p>Balboa Water Group 1/2" 20mm White Air Control Assembly, 10-2200WHT</p>

<p>Balboa 1215185 Wet End Ultimax 2.0 HP 2 Inch MPT</p>

<p>Balboa Hydro-Quip, 1215023 Side Discharge Dura Jet Pump Wet End; 2 Inch S x 2 Inch D, 1.5 HP</p>

<p>Hydro-Quip, 1215007 Side Discharge Ultimax Pump Wet End; 2 Inch S x 2 Inch D, 4 HP</p>

<p>Balboa Water Group Hydro-Air Clear Gasket, 30-5847CLR</p>