Century 1.0 HP Square Flange Pool Pump Motor, 1 PH, 60 HZ, 230/115 V, 3450RPM, 56Y Frame
Century B2853V1
Starting at $ /mo with Affirm. Prequalify now
1Hp 115/230V Sqfl Motor
Used with: Jandy PHPM/PHPF series 2006-current, Jandy SHPF/SHPM Series 2008-current, Pentair Challenger, Whisperflo, Superflo, Sta-Rite Super Max
Key Features:
Sealed Ball Bearings
50°C Ambient
Stainless Steel Shaft
Switchless
UL 1081 Design
Open Dripproof
Threaded Shaft
Permanent Split Capacitor
Replaces A.O. Smith B283, B2853
Note: NOT California Title 20 Compliant.
Product Overview
Important Info Regarding California Residents
This Century Motor is not compliant with the California Energy Commission (CEC) regulations for pool pumps and residential replacement pool pump motors. According to Title 20, Section 1605.3(g)6 of the CEC, all pool pumps and motors must meet certain energy efficiency standards to ensure they are environmentally friendly and energy-efficient. Unfortunately, this particular motor does not meet these standards and cannot be installed in California and therefore can not be sold or installed in the state of California.
Century Motors currently manufactures six pool pump replacement motor models that conform to the CEC standards:V-Green EVO Models EVC130, EVC165, EVC225, EVQ130, EVQ165, and EVQ225. These models are designed to meet the energy efficiency standards set forth by the CEC, making them an ideal choice for pool owners in California who want to reduce their energy consumption and environmental impact.
Side view
Nameplate Specs:
Phase: 1
Output HP: 1.0 Hp
Output KW: 0.75 kW
Voltage: 230/115 V
Speed: 3450 rpm
Service Factor: 1.25
Frame: P56Y
Enclosure: Drip Proof
Thermal Protection: Thermally Protected
Ambient Temperature: 50 °C
Frequency: 60 Hz
Current: SF 6.5/13.0 A
Duty: Continuous
Insulation Class: F
UL: Recognized
CSA: Y
Number of Speeds: 1
Technical Specs:
Electrical Type: Permanent Split Capacitor, Single Or Dual Voltage
Starting Method: Across The Line
Poles: 2
Rotation: Counterclockwise Pump End
Mounting: Round
Motor Orientation: Horizontal
Drive End Bearing: Ball
Opp Drive End Bearing: Ball
Frame Material: Rolled Steel
Shaft Type: 1/2" Thread
Overall Length: 12.44"
Frame Length: 8.00"
Shaft Diameter: 0.625"
Shaft Extension: .910"
Front right view
Specs & Details
| Product Name | 1.0 HP Square Flange Pool Pump Motor, 1 PH, 60 HZ, 230/115 V, 3450RPM, 56Y Frame |
| Manufacturer Part Number | B2853V1 |
| Sku | MGT-60-2987 |
| UPC | 786674071644 |
California Proposition 65 Warning
WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. For more information: www.p65Warnings.ca.gov
