<p>US Seal PS201. This is the industry standard for general pool and spa applications. Buna rubber, Graphitic Plastic seal face. These seals are not recommended for pools or spas with salt chlorine generator, ozonator, or hydrogen peroxide based sanitizer. For these type of applications it is recommended to use the<a title="Heavy Duty Version of the PS201" href="http://www.poolzoom.com/heavy-duty-seal-assembly-viton-carbon.html" target="_self"> Heavy Duty PS-3868</a> seal, this seal offers better resistance to abrasion, heat and chemicals. Approximately 13/16" Tall (Not Compressed) 3/4" ID 5/16" Thick White Porcelain Piece: 1 1/4" OD</p>
<p>Jacuzzi 16-1097-04-R Basket Assembly - Magnum & Magnum Plus PRIOR 2003</p><p>Top Outside Dimension 5-13/16" Top Inside Dimension 5-1/8" Basket Height 8-3/4" Bottom Outside Dimension 5" OEM Number 16-1097-04 Number on Basket 9978</p>
Magnum Force Housing Strainer Kit After 2/03 Jacuzzi
This includes; Lid, Locking Ring, O-Rings, Basket, Pump Pot, Motor Support, Drain Plug. (RETRO FIT FOR MAGNUM PLUS)
<p>Jacuzzi Magnum Pump Seal Kit, includes : Pump Seal (1), Case O-ring (1), Plug O-ring (1), Strainer O-ring (after 7/89) (1), Diff. Square Ring (1)</p>
Jacuzzi Impeller, 1 HP FULL, 1-1/2 UPRATE, AFTER 12/1/04|
Jacuzzi Impeller
DIAMETER: 4-7/8"
DIAMETER OF INTAKE: 2"
NUMBER OF VANES: 6
OUTSIDE EDGE THICKNESS: 7/16"
INSIDE THICKNESS: 3/16
HP: 1 HP FULL RATED, 1-1/2 HP UP RATED
Jacuzzi Magnum Plus And Magnum Force Pump Seal Housing 1.5-3HP FR 5HP UR
On this Seal Housing there is a raised section around the front where the Impeller sits, about 1/4" tall. There is a 1/4" X 5/16" notch on the outside edge. This raised section extends all the way to the outside screw holes. Measuring the inside diameter of the raised section should be: 5-1/4" and extends to the outside edge.
Outside Diameter: 7-5/16" (A) This Is The Maximum Diameter At The Motor Side
Front To Back: 2-1/4" (B)
Outside Diameter: 6-9/16" This Is At The Front Where There Are 9 Small Holes Around The Outside. There Are Also 3 Additional Holes On The Front
This replacement Jacuzzi Bros diffuser is designed to fit Jacuzzi Magnum 1-1/2 horsepower - 3 horsepower pool pumps and measures 5-1/4" in diameter. This is a new, OEM Jacuzzi Bros part, number: 06-0165-05-R.