AquaChek 511242A 4-in-1 Free Chlorine Test Strips for Swimming Pools
Swimming Pool Chlorine Test Strips by AquaChek. These test strips test for four key values Free Chlorine, Cyanuric Acid, pH and Total Alkalinity. A quantity of 50 strips per bottle. To test the water, just dip an AquaChek strip in the pool water for one second, and remove immediately. Compare the colors on the stip to the bottle, thats it! You get test results in seconds! To keep your pool at its best, test each week. It's also a good idea to write down your results each time you test, so you can track changes.
AquaChekYellow is a test for Free Chlorine, pH, Total Alkalinity and Cyanuric Acid. The test pads on the strip change color to indicate the levels in your pool or spa water. Be sure to snap the lid securely closed on the AquaChek bottle immediately after dispensing a strip. This will prevent strips from spilling and keep them fresh. Store the strips in a cool, dry place, and leave the packet of drying agent in the bottle–it will keep the test strips at their best.
- .Dip a strip into water and remove immediately.
- Hold strip level for 15 seconds (do not shake excess water from strip.)
- Compare pH, Free Chlorine, Total Alkalinity and Stabilizer pads (in that order) to color chart on label.
For best results on Stabilizer (Cyanuric Acid) test, pH should be between 7.0-8.4 and Total Alkalinity should be at or below 240 ppm.
Important: Keep cap closed tight between uses. Store at room temperature. Use by expiration date on cap.
|Product Name||4-in-1 Free Chlorine Test Strips for Swimming Pools|
|Manufacturer Part Number||511242A|
|Substitute Part Numbers||12, 1242, 1242ABC R11/06|