jacuzzi

<p>Replacement Jacuzzi 7 position multiport backwash dial valve for sand filters. Part number: 39262803R</p>

This replacement filter lock ring is designed to fit Jacuzzi Sherlock cartridge filter models SHER80, 120, 160, 200 and Jacuzzi Avalanche DE Filter models AV40, AV60, AV80, AV100. May fit other Jacuzzi model filters. This is a new, OEM part, number: 42-3671-02-R.

This replacement bracket kit is designed to fit Jacuzzi J Series spa pumps. May fit other Jacuzzi model pumps. This is a new, OEM part, number: 02130805R. This kit includes the volute and faceplate.

Jacuzzi Magnum Square Ring Gasket

Standard replacement 1-1/2" Slip fitting union. Original part number: 31175607.

<p>Standpipe Assy, Jacuzzi Laser 250L</p>

<p>This is a complete Jacuzzi DVK-7 valve, clamp on style. Original part number: 39-2630-20-K.</p>

This replacement 3.5 horsepower impeller is designed to fit Jacuzzi Piranha spa pumps. May fit other Jacuzzi model pumps. This impeller is a new, OEM part, number: 05200020R000.

This replacement 1 horsepower impeller is designed to fit Jacuzzi J Series spa pumps. May fit other Jacuzzi model pumps. This impeller is a new, OEM part, number: 05-3863-05-R. <b>Dimensions:</b> Outside Diameter: 3-3/4" Thickness: 15/32" (Outside thickness at outside edge) Thickness: 9/32" (B) (Inside thickness at outside edge) Front to Back: 3-1/4" (From end of shaft to front on intake) Inlet Outside Diameter: 2-1/16" Inlet Inside Diameter: 1-13/16" Shaft Cover Length: 1-1/2" Shaft Cover Outside Diameter: 5/8" (This is where the impeller screws onto the motor shaft)

This replacement Dirt Catcher is designed to fit Jacuzzi SherLok cartridge filter model SHER200. May fit other Jacuzzi model filters. This is a new, OEM Jacuzzi part, number: 42-3740-09-R.

This replacement 1-1/2 horsepower impeller is designed to fit Jacuzzi J Series spa pumps. May fit other Jacuzzi model pumps. This is a new, OEM part, number: 05-3864-04-R. <b>Dimensions:</b> Outside Diameter: 4" Thickness: 7/16" (Outside thickness at outside edge) Thickness: 1/4" (B) (Inside thickness at outside edge) Front to Back: 3-1/4" (From end shaft to front at intake) Inlet Outside Diameter: 2-1/16" Inlet Inside Diameter: 1-13/16" Shaft Cover Length: 1-1/2" Shaft Cover Outside Diameter: 5/8" (This is where the impeller screws onto the motor shaft)

This replacement 2 horsepower impeller is designed to fit Jacuzzi Piranha S2A series pumps. May fit other Jacuzzi model pumps. This impeller is a new, OEM part, number: 05150015R000 / 05150015R. <b>Dimensions:</b> Outside Diameter: 3-7/8" (A) Thickness: 11/16" (Outside thickness at outside edge) (B) Thickness: 3/8" (Inside thickness at outside edge) Front to Back: 3-5/16" (From end of shaft to front on intake) Inlet Inside Diameter: 2-3/4" Inlet Outside Diameter: 2-31/32" Shaft Length: 1-5/8" Shaft Outside Diameter: 5/8" (This is where the impeller screws onto the motor shaft)

This replacement 3/4 horsepower impeller is designed to fit Jacuzzi J Series spa pumps. May fit other model pumps. This impeller is a new, OEM Jacuzzi part, number: 05-3862-06-R.

This replacement 5/8" Seal Plate is designed to fit the Jacuzzi Piranha spa pumps. May fit other model Jacuzzi pumps. This seal plate is a new, OEM part, number: 02168409R000 / 02168409R.

1-1/2" Plug w/ Gasket

<p>Jacuzzi Bros 1 horsepower Cygnet II single speed pool pump. 115/230V</p> <ul> <li>The Jacuzzi Cygnet II swimming pool pump has a high efficiency diffuser for increased performance and priming capability.</li> <li>Floating eye seal between the closed impeller and difffuser maximizes pool pump efficiency for best flow and pressure.</li> <li>One piece case molded from glass reinforced, corrosion- resistant thermoplastic with tow convenient drain plugs for winterizing.</li> <li>Large strainer basket for increased efficiency and reduced maintenance. Clear lid gives clear view of the pump basket.</li> <li>Two inch plumbing connection optimizes hydraulic efficiency.</li> <li>2 Yr warranty</li> </ul> <p></p> <p><span id="docs-internal-guid-ad71e595-7fff-1596-e541-c8c98ba57637" style="background-color: #ffff00;">This Item Has Been Discontinued by the Manufacturer.</span></p>

Replacement Tank Body with 2" connections. This body fits the Jacuzzi Avalanche and Jacuzzi SherLok. This is a new, OEM Jacuzzi Bros part, number: 42-3673-00-R.

Replacement Jacuzzi union nut. Part number: 9921.

This replacement Dirt Catcher is designed to fit Jacuzzi SherLok cartridge filter model SHER80. Stands 14-1/2" tall. May fit other Jacuzzi model filters. This is a new, OEM Jacuzzi part, number: 42-2946-03-R.

This replacement 4.5 horsepower impeller is designed to fit Jacuzzi Piranha spa pumps. May fit other Jacuzzi model pumps. This impeller is a new, OEM part, number: 05036504.

Complete side discharge wet end for 1HP JWB pumps. Fits 56 frame motors. 1-1/2" plumbing size.

Magnum Diffuser 4 & 5 HP Uprated

This replacement 2 horsepower impeller is designed to fit Jacuzzi J Series spa pumps. May fit other Jacuzzi model pumps. This is a new, OEM part, number: 05-3865-03-R. <b>Dimensions:</b> Outside Diameter: 4-3/16" Thickness: 1/2" (Outside thickness at outside edge) Thickness: 5/16" (B) (Inside thickness at outside edge) Front to Back: 3-1/4" (From end of shaft to front of intake) Inlet Outside Diameter: 2-1/16" Inlet Inside Diameter: 1-13/16" Shaft Cover Length: 1-1/2" Shaft Cover Outside Diameter: 5/8" (This is where the impeller screws onto the motor shaft)

Jacuzzi Magnum Energy Efficient 1 Horsepower Up-Rated pool pump <li>Exclusive Ring-Lok access to remove motor from the pump's wet end. No Tools needed! <li>Quieter operation, Energy Efficient Motor <li>Built in base, Built in Influent Check Valve <li>Patented air-cooled heat sink allows pump to run dry without damage! <li>Floating eye seal between closed pump impeller and diffuser maximizes efficiency. <li>One-piece case with two convenient drain plugs for winterizing. Built in unions for easy installation. <li>Higher suction port for faster self-priming. <li>180 cubic inch strainer basket allows longer intervals between cleaning. Clear lid allows view.

<p>Jacuzzi Magnum Force 3 Energy Efficient 5HP Single Phase Pump 208/230V. Part number: 94022770. Jacuzzi Magnum Force in ground pool pumps are high quality, energy efficient pumps that last longer than many higher priced models. Jacuzzi’s patented air cooled heat sink allows the pump to run dry without damage to the shaft seal. The exclusive Ring-Loc design gives easy tool free access to the strainer basket and pump internals for easy clean up and service. Jacuzzi brand pool pumps are built to last and provide years of trouble free service.</p>

Jacuzzi Bros .75 horsepower Cygnet single speed pool pump. 115/230V <li>The Jacuzzi Cygnet swimming pool pump has a high efficiency diffuser for increased performance and priming capability. <li>Floating eye seal between the closed impeller and difffuser maximizes pool pump efficiency for best flow and pressure. <li>One piece case molded from glass reinforced, corrosion- resistant thermoplastic with tow convenient drain plugs for winterizing. <li>Large strainer basket for increased efficiency and reduced maintenance. Clear lid gives clear view of the pump basket. <li>Two inch plumbing connection optimizes hydraulic efficiency. <li>2 Yr warranty

This replacement suction flange o-ring is designed to fit Jacuzzi J series pumps. May fit other model pumps. This o-ring measures 5-1/2" Inside Diameter, 3/16" Cross Section. OEM Part Number: 47035746R.

This replacement Dirt Catcher is designed to fit Jacuzzi SherLok cartridge filter model SHER160. May fit other Jacuzzi model filters. This is a new, OEM Jacuzzi part, number: 42-3739-02-R.

Replacement tank lid designed to fit Jacuzzi SherLok & Avalanche cartridge swimming pool filters, models: SHER160, AV-80. This is a new, OEM Jacuzzi part, number: 42-3610-00-R.

This replacement Dirt Catcher is designed to fit Jacuzzi SherLok cartridge filter model SHER120. May fit other Jacuzzi model filters. This is a new, OEM Jacuzzi part, number: 42-2947-02-R.

Tri-Clops 600 - Oval Filter

<p>This replacement 2" Faceplate w/ Suction is designed to fit Jacuzzi J Series spa pumps. May fit other Jacuzzi model pumps. This is a new, OEM part, number: 03065109R.</p>

Replacement Tank Body with 1-1/2" connections. This body fits the Jacuzzi Avalanche and Jacuzzi SherLok. This is a new, OEM Jacuzzi Bros part, number: 42-3662-00-R.

<p>This replacement 2.5 horsepower impeller is designed to fit Jacuzzi S3A Piranha series pumps. May fit other model Jacuzzi pumps. This impeller is a new, OEM part, number: 05200025R000 / 05000025R.</p>

This replacement Flange Gasket is designed to fit Jacuzzi Whirlpool pumps. May fit other Jacuzzi model pumps. <b>Dimensions:</b>

This replacement pump case is designed to fit Jacuzzi Piranha model spa pumps. May fit other Jacuzzi model parts. This is a new, OEM part, number: 03-0889-03-K.

Threaded Lateral Kit for Jacuzzi Laser L190 and L225 Filters; Includes 8 Laterals for Filters (Prior 02/03)

Screw, 10-12 x 1"

Pump Case w/ Plugs S2A - S4A

2" Flange

Tank Base, Laser - 160L/190L/225L

<p>Standpipe, Jacuzzi Laser 250C</p>

<p>Jacuzzi / Sundance</p><p>Replaces 6560-130<br><br>Used on 2013-2014 J-385, J-375, J-355, J-345, J-335, J-325, J-315<br><br>Used on 2007-2012 J-375, J-365, J-355, J-345, J-335, J-325, J-315</p><p></p><p>Waterfall assembly for J-300 series Jacuzzi's. This unit includes built-in light with brand new mini-DIN connector found on 2013+ spas.</p>