Polaris 380 Cleaner Parts

<p><img style="float: right; padding: 10px;" src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris G5 Feed Hose" height="53" /></p> <p>Polaris Sweep Hose Tail Scrubber. For use with Polaris pool cleaners. The Polaris Tail Sweep Scrubber is designed to scrub all pool surfaces, as well as clean corners and steps.  All the while, protecting the tip of the sweep hose.</p> <p>This is a single tail scrubber, which will fit securely over the tip of the sweep hose. It is time to replace the scrubbers when they begin to thin, tear or no longer fit securely.  </p> <p>Fits Polaris 3900, 380, 360, 280, 180, cleaners.</p> <p>Polaris Part Number 9-100-3105</p>

Polaris Zippered Bag + 3 Scrubbers for 360/380 Pool Cleaner | R0570600

<p><img style="float: right; padding: 10px;" src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris G5 Feed Hose" height="53" /></p> <p>Zodiac Brand Item Number C10</p> <p><br /> The Polaris all-purpose tire provides maximum traction without damage to pool finishes.</p> <p>This tire fits Polaris models 180/280/360/380 Pool cleaners and connects to the backboard with 4 Bolts (Hardware Not Included.) This is an original factory service Polaris C10 MaxTrax replacement tire, brand new and sealed in individual Polaris packages.</p> <p>It is time to replace your tire tracks when: they no longer fit the wheel snuggly, become dry and brittle, or begin to discolor or swell.</p>

<p>The Polaris D-29 Quick Disconnect UWF (Universal Wall Fitting) for the Polaris 180, 280 and 380 automatic pool cleaners. This is the main body of the wall fitting that does a twist lock into the pool wall.</p><p><strong>OEM Polaris D29 Replacement Part </strong></p>

<p>Polaris G52 Back-up Valve Assembly. This is a factory original Polaris replacement back up valve. It has a timer mechanism inside that diverts water out of a jet every 5-10 minutes. This jet acts as a back up, pulling the cleaner out from the pool floor or wall. There is an arrow on one side of the hose barb that should face towards the cleaner. It is designed to go inline on the hose 5-6 feet back from the head of the unit. </p>

<p><img style="float: right; padding: 10px;" src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris G5 Feed Hose" height="53" /> Replacement Hose Parts, Swivel for Polaris 380/280/180/3900 Vac Sweep Pool Cleaners. This is the coupling that attaches the pieces of hose together.</p>

<p>This Polaris Pressure Relief Valve is threaded on the outside and has a spring inside with a black piece of plastic that keeps it compressed. The spring is Polaris factory set, when the pressure inside the line exceeds the spring tension, the spring opens and relieves the excess pressure. It can be manually adjusted by screwing it in our out of the wall fitting housing. Screwing it all the way in give the Polaris the maximum amount of pressure and speeds it up, unscrewing it will relieve the pressure and slow the cleaner down.</p>

Replacement All Purpose Bag with velcro closure is designed to fit Polaris 360 & 380 pool cleaners. This is a new, OEM Polaris part, number: 9-100-1014. <p>Polaris has been leading the swimming pool industry for over 35 years, making Polaris the number one automatic pool cleaner brand. Polaris is known in the industry for its outstanding customer service and extremely reliable products.</p>

<p></p><p>Polaris Universal Wall Fitting (UWF) Connector Assembly. Compatible with Polaris 180, 280, 280, 380, 3900 Sport and 480 Pro Automatic Pool Cleaners. The wall fitting package includes a universal wall fitting adapter, pressure relief valve and both sizes of restriction washers.</p><p><strong>NOTE : Polaris no longer includes the filter screen -&nbsp;6-504-00</strong> -<strong> with this part</strong>, since all newer cleaners and feed hoses now come with the inline filter assembly (SEE Related Products below). If you need the older style screen, you can add it to this item in your shopping cart, from the <strong>Frequently Purchased Together</strong> section below. </p><p></p>

<img src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris Sweep Hose Clamp" height="53" style="float:right; padding:10px;"/> Zodiac Polaris B15 Sweep Hose Clamp. (Fits 180, 280, 280 Tank Trax, 360 and 380 Automatic Pool Cleaners)

Polaris Belt Kit, fits models 360 and 380 Vac Sweep Automatic Pool Cleaners.

<p><img style="float: right; padding: 10px;" src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris G5 Feed Hose" height="53" /></p> <p>Polaris Sweep Hose, Complete. Includes all the wear rings, hose and hose clamp. The Polaris B5 Sweep Hose fits on the 180, 280, 380, and 480 Polaris pool cleaners. The sweep hose aids in sweeping and loosening debris from the bottom of the pool surface.</p>

<img src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris G5 Feed Hose" height="53" style="float:right; padding:10px;"/>Polaris Replacement Filter Screen for Universal Wall Fitting (UWF, 9-100-9001)

<p>CMP 25563-300-500 Replacement 5-Pack of Sweep Hose Scrubber For Polaris Pool Cleaners. Quantity of 5 Foam Tail Scrubbers Included.</p>

<p>The Polaris 9-100-1108 Wheel Bearing fits the Polaris 340, 360 and 380 automatic swimming pool cleaners. The Polaris 360 &amp; 380 require a quantity of 8 bearings. Polars OEM Ball Bearing.</p> <p><strong>This part fixes the following symptoms: </strong> Loose wobbly wheels. When the bearings go out the wheel will become loose and wobble side to side.</p>

<p><img style="float: right; padding: 10px;" src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris G5 Feed Hose" height="53" /> Polaris Feed Hose Mender Nut for the 180, 280, 380, and 3900 Polaris pool cleaners. (D-15)</p>

<p>Polaris A20 Ballast Head Float. (380/360/280/180)<br><br><strong>This part fixes the following symptoms:</strong> Polaris unit laying on side.</p><p>The factory original Polaris replacement Head Float for the Polaris 180, 280, 360, and 380 automatic pool cleaners. Easy to remove and install, the float simply pushes and screws onto the cleaners float mast.<br><br></p>

<p>Zodiac Polaris 6-500-00 Universal Wall Fitting, White. (Fits 180, 280, 280 Tank Trax, 360, 380, 3900 Sport and 480 Pro Automatic Pool Cleaners.) This is the collar that attaches the Polaris Universal Wall Fitting into the wall. One side has 1-1/2" threads that goes into the pool wall, the other side has the 2 nubs that the bayonet fitting locks into to. </p>

<p>Polaris OEM Sand and Silt Bag for Polaris 360 &amp; 380 pool cleaners. </p>

<p>Polaris 9-100-1021 All-Purpose Zipper Bag for Polaris Vac-Sweep 360/380 Pool Cleaners.</p>

<p>Polaris 9-100-9010 Tune-up kits are a convenient way to order all parts necessary to put your Polaris back in tip-top condition. This kit will rebuild the drive train, including belts, axles, turbines, gears, wheels, bearings, and tires. Also included is a new all-purpose filter bag. This tune-up kit will work in the Polaris 360 or 380 models. The kit includes Installation Instructions, which can be downloaded on this page under the downloads section below.</p>

<p>The Polaris Feed Hose is the ideal replacement for any <strong>Polaris 180, 280, 380, 3900</strong> pool cleaner with a worn out hose. A worn out hose will have stiff sections of hose and the swivels will be leaky and hard to turn. This new hose comes complete with 30' of hose and includes the Polaris universal wall fitting. <strong>The back-up Valve (G52) and the filter screen (6-504-00) are not included.</strong></p>

<img src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris G5 Feed Hose" height="53" style="float:right; padding:10px;"/>O-Ring for Polaris Universal Wall Fitting. Roughly 1-3/4" diameter.

<p>Polaris Pool Cleaner Bag Collar Hose Clip. This is the clip that goes through the velco tab on the filter bag and clips on to the hose. Fits Polaris 280, 380, 3900, TR28P with 3/4" hose.</p>

Polaris 380 and 360 Replacement Feed Pipe O-Ring

<p>Polaris B10 Wear Ring for Sweep Hose Tail on the Polaris 180, 280, 360, and 380 pool cleaners.</p>

<p>The Polaris replacement 10 foot Hard Feed Hose, (D-45), fits the Polaris 180, 280 and 380 automatic pool cleaners. </p>

<p>Polaris 9-100-5107 Single E-clip, Stainless Steel For Models (380/360/340) </p>

<p>Polaris G54 Back-up Valve Case Kit for the 180, 280, and 380 Polaris pool cleaner models. This part is <strong>ONLY the outer shell</strong> for the back-up valve, it <strong>does not include the internals. </strong>The Internal valve assembly is not included. </p>

<p>Polaris 48-222 In-Line Filter Screen for 280/380/3900 Sport/480 PRO/280 TankTrax Pool Cleaners</p>

<p>This is the OEM replacement top cover for the Polaris pool cleaners 380 and 360. If your cleaner has 1 piece cover then this is the direct replacement. If your cleaner has a 2 piece top then you must replace your 2 piece top cover with the top and bottom kit, Polaris <a target="_blank" rel="noopener noreferrer nofollow" class="text-primary-100 in-cell-link" href="https://www.poolzoom.com/top-base-assembly-380-360.html">9-100-7030.</a></p><p>If you are unsure of your top style, it may be a good idea to purchase the top and bottom kit as the new style top and bottom kit will retrofit on all old style Polaris 380 and 360 cleaners. </p>

<p>The Polaris replacement Drive Train Gear Kit, part number 9-100-1132, includes the drive train gears and turbine bearing for the Polaris 360 and 380 automatic pool cleaners. </p>

<p>Polaris G57 Back-Up Valve Collar for Polaris Vac-Sweep 180/280/380, 280 TankTrax Pool Cleaners. </p>

<p>Replacement Top and Bottom Assembly for the Polaris 360 and 380 Pool Cleaners. Polaris Part: 9-100-7030. This top and base will fit on all older and newer style Polaris 360 and 380 cleaners. The old style had a two piece top. The top and bottom for the old style is no longer available and you will have to order this kit to replace them. This kit will include everything you need to convert your cleaner to the new style. If you have any questions, please don't hesitate to ask questions below. </p>

<p>Polaris 9-100-1008 Double Side Wheel, White. (Fits 360 and 380 Vac Sweep Automatic Pool Cleaners) This is the same as Polaris R0615700, Silver.</p>

<p>Polaris D50 Leader Hose, 10 Foot. This is the section of hose that is closest to the cleaner. The rubber is more pliable and flexible than the sections of hose closer to the wall. (380/280/180/3900) </p>

<p>Polaris C40 10-32 x 3/8" Stainless Steel Pan Screw for Vac-Sweep 180/280/360/380, 280 TankTrax/480 PRO, 3900 Sport Pool Cleaners</p>

Polaris Ladder Guard set of 2 Panels G21 helps keep your Polaris cleaner from getting stuck on the pool ladder. Fits on most ladders with poles under 2" Diameter, 1.5" Diameter preferred.

<p>Polaris 380 Feed Pipe Assembly. This is Polaris OEM Part Number 9-100-7003. This feed pipe is what the hose connects to on top of the cleaner. The ballast float also slips on a stem off the back of this piece. The most common reason to replace this piece is because the ballast stem has broken off, this feed pipe will fix that problem. This feed pipe fits all models of Polaris 380 pool cleaners. This 9-100-7003 feed pipe includes the o-ring that connects into the 380 base. This feed pipe fits the Polaris 380 pool cleaner which has a 3/4" smooth feed hose. Note: If your Polaris has a larger corrugated hose, 1.5" in diameter then you have a Polaris 360 and this feed pipe will not work. The feed hose for the Polaris 360 is a 9-100-1002, check the related products below for a link to it. </p>

Polaris Wheel Hub Caps fit on the Polaris 380, 360, and 340 pool cleaner wheels.

Zodiac Polaris 10-112-00 UWF Restrictor Disks. (Fits 180, 280, 280 Tank Trax, 360, 380, 3900 Sport and 480 Pro Automatic Pool Cleaners)

<p>The Polaris Feed Hose Float is designed to help keep the feed hose afloat. It fits Polaris 180, 280, and 380 model pool cleaners. </p>

<p>This is the new style Polaris in-Line filter assembly. It is an improvement because you can see when there is debris through the clear housing. It also acts as a hose swivel, so if you want to put this on your old style hose, you can simply remove the first swivel in the hose and install this. This in-line pool filter features a nice big stainless steel filter screen. </p>

<p>This is the NEW style Base Assembly for Polaris cleaners 380 and 360. It must be used with the NEW style, single piece top. If your cleaner has a 2 piece clam-shell style top then you must replace the top and bottom together, order Polaris 9-100-7030 top and base kit. The top and base kit is the new style and will retrofit on all old style Polaris 380 and 360 cleaners.</p>

<p><img style="float: right; padding: 10px;" src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris G5 Feed Hose" height="53" /> Polaris 360/380 Leaf Bag</p>

<p>The Polaris 380 Factory Rebuild Kit is a great way to give your Polaris 380 pool cleaner a new life. This rebuild kit includes everything you need from the screws and clips to replacement tires. Comes complete with Instructions.<br /><img src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris 380 Rebuild Kit" /></p>

<p>Replacement Polaris 380/360 Wheel. The Polaris Wheel Single-Side fits on the Polaris 360 and 380 Pool Cleaner. OEM 87-100-1636 </p>

Replacement Water Management System for Polaris 380 pool cleaners. This is a new, OEM Polaris part, number: 9-100-7010