Salt Generator Parts

<p>CompuPool Replacement Salt Cell Electrode for CPSC48, 10-Blade for up to 60,000 Gallons, JD363130E</p><p>The CPSC48 electrode uses 10 titanium blades to produce 2.5 pounds of chlorine per day for pools up to 60,000 gallons in volume. The level of salinity can be easily maintained at the power center, making for a pleasing swimming experience as smooth, silky water provides a welcome contrast to the often overly chlorinated, irritating pool and spa water of years past. Periodic cleaning of the cell can also be performed with a simple mixture of water and muriatic acid.</p><p>CPSC cells, electrode-only models and full systems are popular for a number of other reasons as well:</p><ul><li><p>Default salt level setting of 3500 parts per million, which can be easily adjusted</p></li><li><p>Automatic operation plus battery-powered backup timer for consistent schedule</p></li><li><p>Automatic detection when water’s salt level is too high</p></li><li><p>Intuitive touch pad controls for easy setting of desired levels</p></li><li><p>No-flow sensor, plus high-salt and low-salt fault lights</p></li><li><p>Water temperature sensor to help make salt level reading more accurate</p></li><li><p>Large alloy heat sink to help dissipate heat and prevent corrosion</p></li><li><p>Entire system fully weather protected</p></li><li><p>Winter mode to compensate for colder water being chlorinated</p></li><li><p>Waterproof connectors make installing replacement cells simple</p></li></ul><p></p>

<p>The CompuPool CPSC08 replacement salt cell electrode is for use with the CPSC08 chlorination system only. The unit housing, unions and O-rings are not included with the cell, and we always recommend adding a new cord (see Items We Suggest) when replacing the cell or electrode. The CPSC08 electrode uses two titanium blades to produce nearly half a pound of chlorine per day for spas and small residential pools up to 5,000 gallons. The level of salinity can be easily maintained at the power center, making for a pleasing swimming experience as smooth, silky water provides a welcome contrast to the often overly chlorinated, irritating pool and spa water of years past. Periodic cleaning of the electrode can also be performed with a simple mixture of water and muriatic acid. </p>

CompuPool Clear Electrode Housing Body; JD363102Z<br>For Use With: CompuPool Salt Chlorine Generator for Inground Pools CPSC Series

<p>CompuPool OEM Replacement Salt Cell with Housing for CPSC08, 2-Blade for up to 5,000 Gallons </p>

Interface Keypad; JD363050A<br> <br>For Use With: CompuPool Salt Chlorine Generator for Inground Pools CPSC Series

CPSC Power Center Board PCB JDPCBSCR

<p>The CompuPool CPSC16 replacement salt cell electrode is for use with the CPSC16 chlorination system. The unit housing, unions and O-rings are <strong>not</strong> included with the cell, and we always recommend adding a new cord when replacing the cell or electrode.</p><p style="text-align: left;">The CPSC16 electrode uses four titanium blades to a full pound of chlorine per day for pools up to 20,000 gallons in volume. The level of salinity can be easily maintained at the power center, making for a pleasing swimming experience as smooth, silky water provides a welcome contrast to the often overly chlorinated, irritating pool and spa water of years past. Periodic cleaning of the cell can also be performed with a simple mixture of water and muriatic acid. </p>

<p>Union Blanking Cap, For Use With: CompuPool CPX Series Cells </p>

<p>Compupool CPX Series Power Circuit Board, CPX-POWER PCBA</p><p></p>

<p>O-ring seal kit. Includes JD363PIPO and JD363ECM rings for a watertight, chemical-resistant seal. </p>

<p>Autopilot Residential Manifold Top Loop. PLS0035</p>