Jandy Pump Parts

<p>Jandy Genuine OEM Replacement Lid &amp; Lock-Ring Assembly with Seal Gasket, PHPF/PHPM</p><p></p><p>Trap Lid Diameter 7-13/16" Trap Lid Material Type Plastic/Clear Trap Lid Type 4 Tab Twist Lock Trap Lid Manufacturer Jandy/Zodiac Model Plus HP PHPF, Plus HP PHPM<br></p><p>This is the replacement lid for p/n <strong>A0578200 &amp; A0578100</strong></p><p>A0578100 is stamped into the clear lid part, which is only available in this kit.</p><p><br></p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Pump Basket for SHPF and SHPM Stealth Pump, WaterFall Series Pump Models SHPF, SHPM, SWF, and &nbsp;Jandy ePump Variable Speed Pump Model JEP</p><p></p><p><strong>Height: 11-3/4"</strong></p><p><strong>Bottom OD: 4-13/16"</strong></p><p><strong>Top ID: 6-1/4"</strong></p><p><strong>Top OD: 7-13/16"</strong></p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Lid &amp; Locking Ring Assembly w/O-Ring. Stamped A0577900</p><p>Trap Lid Diameter 10-1/16" Trap Lid Material Type Plastic/Clear Trap Lid Type 4 Tab Twist Lock Trap Lid Manufacturer Jandy/Zodiac Model ePump JEP, Stealth SHPF, Stealth SHPM </p><p></p><p><strong>Trap Lid Diameter: </strong>10-1/16"</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy R0480100 Pump Debris Filter Basket for FHPM/FHP Series Pumps OEM Jandy Product.</p><p></p><p><strong>Height:</strong> 9-9/16"</p><p><strong>Bottom OD:</strong> 4-7/16"</p><p><strong>Top ID:</strong> 4-9/16"</p><p><strong>Top OD: </strong>5-7/16" </p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>This is the Polaris OEM Mechanical Shaft Seal is used on a Number of older pumps. </p><p></p><ul><li><p>Jandy Stealth SHPF &amp; SHPM Pumps: <strong>Used on serial number prior to P08FF0001</strong><br></p></li><li><p>Polaris PB4-60 Booster Pumps: <strong>Used on serial number after&nbsp;PB120111001 or&nbsp; starting at AVEH050100</strong></p></li></ul><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy PlusHP2 MaxHP Trap Lid Oring Kit. (Lid Seal w/ O-Ring # R0449100) This kit includes both an o-ring and a lid seal gasket. The seal has a rectangular cross section. </p><p></p><p><strong>Dimensions: </strong></p><p></p><p>O-RING: </p><ul><li><p>6-3/16" OD</p></li><li><p>5-13/16" ID</p></li><li><p>3/16" THICKNESS </p></li></ul><p>SEAL:</p><ul><li><p>6-1/8" OD, </p></li><li><p>5-3/8" ID. </p></li><li><p> 3/8" THICK FRONT TO BACK </p></li><li><p>Note: these dimensions are approximate.</p></li></ul><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

Generic replacement Mechanical Shaft Seal Used On A Number Of Pumps. Including PB4-60's after serial number PB120111001

<p>Jandy R0448900 Filter Basket for PHPF/PHPM/MHPM Series Pumps </p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy Genuine Replacement Parts, Pro Series Mechanical Shaft Seal Carbon and Ceramic. </p><p></p><p>Fits Jandy&nbsp;Stealth&nbsp;SHPF&nbsp;&amp;&nbsp;SHPM&nbsp;Series Pumps, used on serial number P08FF0001 and up.&nbsp;</p><p></p><p>Also fits Zodiac Jandy ePump variable speed pump models JEP, and Flo Pro Variable Speed models FHPM &amp; VS-FHP</p><p></p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Lid O-Ring for SHPF and SHPM Stealth Pumps</p> <p><span style="font-family: arial;">THIS KIT INCLUDES 2 O-RINGS </span></p> <p><span style="font-family: arial;">ONE IS A STANDARD CIRCULAR CROSS SECTION O-RING</span></p> <p><span style="font-family: arial;"> THE OTHER IS A SQUARE CROSS SECTION O-RING </span></p> <p><span style="font-family: arial;">BOTH ARE THE SAME SIZE </span></p> <p><span style="font-family: arial;">OUTSIDE DIAMETER: 8-1/2" </span></p> <p><span style="font-family: arial;">INSIDE DIAMETER: 8"</span></p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Pump Body for SHPM and SHPF Stealth Pumps</p><p>Drain Plugs NOT included (R0446000)&nbsp;</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy Replacement Lid with Locking Assembly kit. Fits the FHP FloPro Pumps. Includes Lid O-ring in Kit.</p> <table class="margintop4"> <tbody> <tr> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl0_labelAttributeName">Trap Lid Diameter</span></td> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl0_labelAttributeValue">6-7/8"</span></td> </tr> <tr> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl1_labelAttributeName">Trap Lid Material Type</span></td> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl1_labelAttributeValue">Plastic/Clear</span></td> </tr> <tr> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl2_labelAttributeName">Trap Lid Type</span></td> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl2_labelAttributeValue">4 Tab Twist Lock</span></td> </tr> <tr> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl3_labelAttributeName">Trap Lid Manufacturer</span></td> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl3_labelAttributeValue">Jandy/Zodiac</span></td> </tr> <tr> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl4_labelAttributeName">Model</span></td> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl4_labelAttributeValue">FHPF, FHPM</span></td> </tr> </tbody> </table><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy R0479800 Pump Body for FHPM/VS-FHP Series Pump</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<ul>Jandy Impeller &amp; Diffuser Kit for 1-1/2 Horsepower Full Rate or 2 Horsepower Up-Rated Pumps</ul> <ul>Please NOTE : R0479400 Mechanical Seal, 5/8" ID is included with all kits.</ul> <ul>This seal is used on all SHPF / SHPM &amp; PHPF / PFPM pumps with serial number P08FF0001 and newer</ul> <ul>If you need the older style R0445500 Mechanical Seal, 13/16" ID, you will need to order the item separately, as it is not included with these kits</ul><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Genuine OEM Jandy Diffuser for 1/2 thru 3 Horsepower Pumps.</p><p></p><p><strong>For Use With:</strong> Jandy Stealth SHPF/SHPM, WaterFeature, MaxHP MHPM, PlusHP PHPF/PHPM Series Pumps and ePump Variable Speed Pumps</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>The Jandy R0446101, 2"x2-1/2" Tail Piece for 3/4 thru 2-1/2 Horsepower Stealth Pumps, can be a replacement part for the Zodiac Jandy <strong>SHPF &amp; SHPM Pumps</strong>, and Zodiac <strong>Jandy ePump JEP</strong> Variable Speed Pump.</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

Lid O-Ring, FHP<p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy Genuine Parts R0479000 Blue Pressure O-Ring.</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy R0449000 2" x 2 1/2" Tail Piece with O-Ring and Coupling Nut Set of 2.</p><p></p><p>The Jandy product, 2" x 2-1/2" Pump Union/Tail Peice Assembly, is used for Heaters, Heat Pumps, and Gas Heaters. It is a replacement part for the Zodiac Jandy PlusHP PHPF &amp; PHPM Pumps, Zodiac Jandy Legacy Model LRZE Gas Heater (2009 - Present), and Zodiac Jandy Legacy Model LRZM Gas Heater (2009 - Present).</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Drain plug with O-ring replacement. Fits Zodiac Jandy ePump, Stealth, PlusHP, FloPro, Water Feature, WaterFall, MaxHP series pumps models JEP, SHPF/SHPM, PHPF/PHPM, FHPM, WFTR, SWF, MHPM. Also fits Zodiac Legacy LRZE, LRZM pool and spa heater models 125, 175, 250, 325, 400 and LXi Low NOx pool and spa heater models 250, 300, 400. Compatible with Zodiac Jandy Nature2 Fusion Soft and Inground water purification system model FSOFT700, FSOFT1400, FUSION. Includes 2 drain plugs and 2 o-rings</p><p>*Please note there has been a change in the design </p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy R0448700 Pump Body Housing for PHPF/PHPM Pool Pumps</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Generic replacement Jandy Pro Series Mechanical Seal, Carbon And Ceramic, FHPM, VS-FHP. </p>

Jandy Zodiac FloPro VS Pump 2-1/2 HP Impeller with Screw & Back-Up Plate O-Ring<p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Genuine Jandy Flo Pro Replacement Pump Parts. Backplate Kit - R0479500. Includes: Backplate, O-Ring &amp; Shaft Seal. Jandy# R0479400.</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy R0445200 Stealth Back Plate Kit with Seals, Bolts, and Jandy Shaft Seal.</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

Pump Strainer Basket R0555500 JHP/JHPU Series<p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy R0327301 2" x 2" Tailpiece O-Ring and Union Nut Kit</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

Pump Union, 2-1/2"s x 3"spg, 3.0-5.0hp, qty 2<p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>1HP Impeller w/ O-Ring &amp; Screw for Jandy FHPF pumps.</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>The <strong>Jandy Impeller Screw with O-Ring (R0515400)</strong> is a factory-original replacement part, precision-engineered to support optimal performance in a wide range of Jandy pumps. Whether you're replacing worn parts or performing routine maintenance, this reverse-thread screw ensures a secure, leak-resistant impeller installation.</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>JHP and JHPU Pump Pot Lid O-Ring. Jandy Part Number: R0555400</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy Diffuser with O-Ring &amp; Screw FHPM Flo Pro 1.5-2.5 HP</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Replacement Pot Lid Pump Lid with Clamp Ring R0555300</p> <table class="margintop4"> <tbody> <tr> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl0_labelAttributeName">Trap Lid Diameter</span></td> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl0_labelAttributeValue">9-7/8"</span></td> </tr> <tr> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl1_labelAttributeName">Trap Lid Material Type</span></td> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl1_labelAttributeValue">Plastic/Clear</span></td> </tr> <tr> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl2_labelAttributeName">Trap Lid Type</span></td> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl2_labelAttributeValue">Twist Lock</span></td> </tr> <tr> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl3_labelAttributeName">Trap Lid Manufacturer</span></td> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl3_labelAttributeValue">Jandy/Zodiac</span></td> </tr> <tr> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl4_labelAttributeName">Model</span></td> <td><span id="_ctl0__ctl0_listviewSpecificationAttributes_ctrl4_labelAttributeValue">JHP Series, JHPU Series</span></td> </tr> </tbody> </table><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<ul>Impeller &amp; Diffuser for 1 Horsepower Full Rate or 1-1/2 Horsepower Up-Rated Stealth Pump</ul> <ul>Please NOTE : R0479400 Mechanical Seal, 5/8" ID is included with all kits.</ul> <ul>This seal is used on all SHPF / SHPM &amp; PHPF / PFPM pumps with serial number P08FF0001 and newer</ul> <ul>If you need the older style R0445500 Mechanical Seal, 13/16" ID, you will need to order the item separately, as it is not included with these kits</ul> <p></p> <p><span id="docs-internal-guid-58d29898-7fff-258d-00f2-751fecc8e129" style="background-color: #ffff00;">                                             This Item Has Been Discontinued by the Manufacturer.</span></p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy 1.5hp MaxHP Impeller &amp; Diffuser kit. Includes seals and hardware.</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

Jandy FHPM 1.5HP Impeller w/ O-Ring & Screw<p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

Tailpiece O-Ring (Set of 2)<p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

Replacement Jandy O-Ring Gasket for Backplate<p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy Genuine Replacement Parts, Hardware for the Impeller and Diffuser R0446500 </p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>O-Ring, Tail Piece (Set of 2) </p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>1HP Impeller &amp; Diffuser w/ Screw &amp; O-Ring - JANDY MHPM, WTFR</p> <p><span id="docs-internal-guid-11afa133-7fff-4c0d-a262-36c38f444990" style="background-color: #ffff00;">This Item Has Been Discontinued by the Manufacturer.</span></p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

Replacement 3/4" Shaft Seal Assembly. Fits several pool pumps. <b>Dimensions</b> Shaft Size: 3/4" Seal Outside Diameter: 1-9/16" Mating Ring Diameter: 1-3/8" diameter Mating Ring Thickness: 13/32"

<p>Century(R) Up-Rated Pool and Spa Pump Motor, CXPM-Type, Motor Design: Capacitor Start/Run on Low Speed, PSC on High Speed, Open Dripproof Enclosure, 2/0.33 HP, 2.2 THP, 3450/1725 RPM, 56Y Frame, Voltage Rating: 230 V, 10.0/3.5 A, Frequency Rating: 60 Hz, 1-Phase, 2-2-VT -Speed, Mounting Type: C-Face, Motor Thermal Protection: Auto, Insulation Class: B, 1.10 Service Factor, Ball Bearing, Ambient Temperature: 50 deg C, CCWPE Shaft Rotation, Threaded Shaft, Shaft Diameter: 5/8 Inch, Shaft Length: 1-7/8 Inch, Overall Length: 14.40 Inch, 6-1/2 Inch Diameter, Continuous Duty, High Efficiency Group, Square Flange, Flange Material: Aluminum, Shaft Material: 303 Stainless Steel, Black </p>

<ul>Impeller & Diffuser for 3/4 Horsepower Full Rate and 1 Horsepower Up-Rated Pumps</ul> <ul>Please NOTE : R0479400 Mechanical Seal, 5/8" ID is included with all kits.</ul> <ul>This seal is used on all SHPF / SHPM & PHPF / PFPM pumps with serial number P08FF0001 and newer</ul> <ul>If you need the older style R0445500 Mechanical Seal, 13/16" ID, you will need to order the item separately, as it is not included with these kits</ul><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Jandy R0480300 Backplate O-Ring for FHPM/VS-FHP Series Pumps</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Tail Piece O-Ring MHPM </p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

Motor Hardware includes 4 bolts & 4 washers<p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>

<p>Diffuser Impeller Hardware Kit (Diffuser O-ring, Screws (2), Screw with O-ring)</p><p><strong>The Jandy® limited warranty does not apply to Jandy® branded products purchased through the Internet or other e-commerce platforms.</strong></p>