Polaris Pool Cleaner Parts

Polaris 380 and 360 Replacement Feed Pipe O-Ring

<p>Polaris B10 Wear Ring for Sweep Hose Tail on the Polaris 180, 280, 360, and 380 pool cleaners.</p>

<p>The Sand &amp; Silt Filter Canister fits Polaris robotic cleaners. It is the ideal choice for pools with fine dirt and debris. This filter will give your cleaner the ability to filter down to 60 microns for a sparkling pool.</p>

<p>Zodiac Pool Baracuda R0524700 Side A Direction Control Device for MX8 Suction Pool Cleaner </p>

Wheel Bushing (1 set for 1 wheel), Polaris 9300/9300xi/9400

<p>The Polaris replacement 10 foot Hard Feed Hose, (D-45), fits the Polaris 180, 280 and 380 automatic pool cleaners. </p>

<p>Polaris 9-100-5107 Single E-clip, Stainless Steel For Models (380/360/340) </p>

<p>Polaris R0517800 -All Purpose Fine Filter Canister for select Polaris Robotic Cleaners. This is the all-purpose filter cartridge that comes standard with all cleaners.</p>

<p>Polaris G54 Back-up Valve Case Kit for the 180, 280, and 380 Polaris pool cleaner models. This part is <strong>ONLY the outer shell</strong> for the back-up valve, it <strong>does not include the internals. </strong>The Internal valve assembly is not included. </p>

<p>Polaris 48-222 In-Line Filter Screen for 280/380/3900 Sport/480 PRO/280 TankTrax Pool Cleaners</p>

<p>This is the C80 Replacement Ball Bearing that hold the turbine drive shaft on the Polaris 180 and Polaris 280 pool cleaners. Sold Each. This is the OEM Polaris part. Fits the Polaris 280 and 180 Pool Cleaners. If your noticing your Polaris slowing down, this is a good place to start along with the turbine drive shaft itself. </p>

<p>This is the OEM replacement top cover for the Polaris pool cleaners 380 and 360. If your cleaner has 1 piece cover then this is the direct replacement. If your cleaner has a 2 piece top then you must replace your 2 piece top cover with the top and bottom kit, Polaris <a target="_blank" rel="noopener noreferrer nofollow" class="text-primary-100 in-cell-link" href="https://www.poolzoom.com/top-base-assembly-380-360.html">9-100-7030.</a></p><p>If you are unsure of your top style, it may be a good idea to purchase the top and bottom kit as the new style top and bottom kit will retrofit on all old style Polaris 380 and 360 cleaners. </p>

<p>C45 Lock Washer for Swing Axle Kit. Polaris Lock Washer for Swing Axle Kit fits your Polaris 280 pool cleaner. </p>

<p>This is a Genuine Polaris 360 OEM replacement In-line Backup Valve. This back-up valve is made to go on the larger corrugated Polaris 360 hose, which measures roughly 1-1/2" in diameter.'</p><p></p><p><strong>Note</strong>: If your hose is closer to 3/4" in diameter and smooth then you need the G52 back up valve, see the related products below.</p>

<p>This is the Replacement Filter Canister Support Lid for the Polaris Robotic Line of Pool Cleaners. 9300 / 9300xi / 9400. It includes a thick rubber gasket on the bottom. </p><p></p><p>Polaris&nbsp;R0517700, is now&nbsp;R0865100&nbsp;color may vary.</p>

<p>The Polaris replacement Drive Train Gear Kit, part number 9-100-1132, includes the drive train gears and turbine bearing for the Polaris 360 and 380 automatic pool cleaners. </p>

<p>MX8 Pool Cleaner Replacement Engine Assembly. Zodiac Part R0524900 </p>

<img src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris G5 Feed Hose" height="53" style="float:right; padding:10px;"/>Polaris 280 Pool Cleaner Leaf Bag K15. This Polaris filter bag is coated in a blue rubber, making it very durable. The bag has a larger capacity than the standard all-purpose bag. and the holes on the bag are larger giving the cleaner more suction for large debris such as leaves, acorns, sticks and twigs. This bag attaches to the Polaris 280 with two clips, and the bottom collar measures about 3" in diameter.

<p>Zodiac Polaris C76 Axle Screw, 10-32 x 7/8" Stainless Steel Pan Head (Fits 280 and 280 Tank Trax Automatic Pool Cleaners) Sold Individually </p>

<p>Feed Pipe/Timer Blank Assembly, Polaris 360 pool cleaner. This replacement Feed Pipe is for the Polaris 360, which has a corrugated hose that is roughly 1-1/2" in diameter. Includes one feed pipe o-ring. </p>

Axle Plate for Large Axle with Sand Guard (C-66), and Large Axle (Rear Wheel only) (C-65). Made for 180 and 280 Polaris pool cleaners.

<p>Polaris G57 Back-Up Valve Collar for Polaris Vac-Sweep 180/280/380, 280 TankTrax Pool Cleaners. </p>

<p>Replacement Top and Bottom Assembly for the Polaris 360 and 380 Pool Cleaners. Polaris Part: 9-100-7030. This top and base will fit on all older and newer style Polaris 360 and 380 cleaners. The old style had a two piece top. The top and bottom for the old style is no longer available and you will have to order this kit to replace them. This kit will include everything you need to convert your cleaner to the new style. If you have any questions, please don't hesitate to ask questions below. </p>

<p>Replacement OEM Polaris A16 filter bag for Polaris 180 Vac Sweep Automatic Pool Cleaner. All Purpose Sand and Silt Bag. </p>

<p>Polaris 9-100-1008 Double Side Wheel, White. (Fits 360 and 380 Vac Sweep Automatic Pool Cleaners) This is the same as Polaris R0615700, Silver.</p>

<p>This is a replacement bottom base for the Polaris 280 model pool cleaner. This base is held on with 2 screws from the bottom. Check related products below to purchase the replacement screws. Polaris OEM Part K10. </p>

<img src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris G5 Feed Hose" height="53" style="float:right; padding:10px;"/><p>Polaris 3900 Sport Pool Cleaner Wide Trax Replacement Rubber Tire, Black. Factory OEM Polaris Replacement Part.</p>

<p>Polaris D50 Leader Hose, 10 Foot. This is the section of hose that is closest to the cleaner. The rubber is more pliable and flexible than the sections of hose closer to the wall. (380/280/180/3900) </p>

<p>Polaris C40 10-32 x 3/8" Stainless Steel Pan Screw for Vac-Sweep 180/280/360/380, 280 TankTrax/480 PRO, 3900 Sport Pool Cleaners</p>

Polaris Ladder Guard set of 2 Panels G21 helps keep your Polaris cleaner from getting stuck on the pool ladder. Fits on most ladders with poles under 2" Diameter, 1.5" Diameter preferred.

This is a replacement Head Float Kit for the Polaris 3900 Sport pool cleaner. This new style head float will replace the old style head float. Polaris part R0538000

<p>Polaris 380 Feed Pipe Assembly. This is Polaris OEM Part Number 9-100-7003. This feed pipe is what the hose connects to on top of the cleaner. The ballast float also slips on a stem off the back of this piece. The most common reason to replace this piece is because the ballast stem has broken off, this feed pipe will fix that problem. This feed pipe fits all models of Polaris 380 pool cleaners. This 9-100-7003 feed pipe includes the o-ring that connects into the 380 base. This feed pipe fits the Polaris 380 pool cleaner which has a 3/4" smooth feed hose. Note: If your Polaris has a larger corrugated hose, 1.5" in diameter then you have a Polaris 360 and this feed pipe will not work. The feed hose for the Polaris 360 is a 9-100-1002, check the related products below for a link to it. </p>

<p>The Polaris 280 Rebuild Kit is a great way to completely rebuild your Polaris 280 and turn it back into the stud it once was. This OEM Polaris Rebuild comes with all the bearings, wheels, drive train, top, and bottom. It will completely overhaul the 280 head unit leaving only the frame original. Be sure to check out the video on how to install the kit. As always, let us know if you need any help getting the right rebuild kit or getting it installed.<img style="float: right; padding: 10px;" src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris K16 Filter Bag" height="53" /></p>

Polaris Wheel Hub Caps fit on the Polaris 380, 360, and 340 pool cleaner wheels.

<p>Polaris 39-200 3900 Sport Replacement Gearbox Assembly. This includes all the internal bearings and gears within the gearbox. This is an original OEM Polaris replacement part.</p>

Zodiac Polaris 10-112-00 UWF Restrictor Disks. (Fits 180, 280, 280 Tank Trax, 360, 380, 3900 Sport and 480 Pro Automatic Pool Cleaners)

<p>The Polaris Feed Hose Float is designed to help keep the feed hose afloat. It fits Polaris 180, 280, and 380 model pool cleaners. </p>

<p>Polaris 6-400-00 65/165 Replacement internal Mechanism assembly. Polaris OEM 6-400-00 Includes: Cylinder, Mechanism Screw, Piston Assembly, Center Chamber Assembly, Ball Randomizer, Filter Connector/Tube Kit, Connector Chamber and Support Collar.</p>

<p>Polaris 360 Sweep Hose Complete, Clear </p>

<p>This is the new style Polaris in-Line filter assembly. It is an improvement because you can see when there is debris through the clear housing. It also acts as a hose swivel, so if you want to put this on your old style hose, you can simply remove the first swivel in the hose and install this. This in-line pool filter features a nice big stainless steel filter screen. </p>

<p>This is the NEW style Base Assembly for Polaris cleaners 380 and 360. It must be used with the NEW style, single piece top. If your cleaner has a 2 piece clam-shell style top then you must replace the top and bottom together, order Polaris 9-100-7030 top and base kit. The top and base kit is the new style and will retrofit on all old style Polaris 380 and 360 cleaners.</p>

<p><img style="float: right; padding: 10px;" src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris G5 Feed Hose" height="53" /> Polaris 360/380 Leaf Bag</p>

<ul><li><p>Genuine Polaris replacement kit <strong>(Part # R0912100)</strong> featuring the <strong>K13 All-Purpose Zipper Bag</strong> and <strong>9-100-3105 Tail/Sweep Hose Scrubber</strong> — designed for <strong>Polaris 280, 280 Tank Trax, TR28P, and 480</strong> models.</p></li><li><p><strong>Durable white zippered debris bag (K13)</strong> traps fine sand, silt, leaves, and seed pods while maintaining strong water flow — an upgrade from traditional Velcro-style bags.</p></li><li><p><strong>Quick snap-on installation</strong> makes bag changes fast and mess-free, while the <strong>secure zipper closure</strong> prevents debris spills during pool cleaning.</p></li><li><p><strong>Tail scrubber attachment</strong> gently agitates and protects the sweep hose tip, improving cleaning reach and extending the life of your Polaris pressure-side cleaner.</p></li><li><p>Using <strong>genuine Polaris OEM parts</strong> ensures reliable performance, optimal suction power, and helps maintain your cleaner’s <strong>factory warranty</strong>. </p></li></ul>

<p>The Polaris 380 Factory Rebuild Kit is a great way to give your Polaris 380 pool cleaner a new life. This rebuild kit includes everything you need from the screws and clips to replacement tires. Comes complete with Instructions.<br /><img src="{{media url="website_images/polaris_logo.jpg"}}" alt="Polaris 380 Rebuild Kit" /></p>

<p>Polaris 9-100-3135 Bag Tie Collar for the Polaris 360 pool cleaner. </p>

<p>Replacement Polaris 380/360 Wheel. The Polaris Wheel Single-Side fits on the Polaris 360 and 380 Pool Cleaner. OEM 87-100-1636 </p>

<p>New Style Single-Side Wheel for Polaris 3900 Sport Pool Cleaner. Part Number 393-401 is stamped into the plastic on the back of the wheel.</p>

Replacement Water Management System for Polaris 380 pool cleaners. This is a new, OEM Polaris part, number: 9-100-7010